Habanero DVK Overview and OpenWRT Initial Setup

In this video, we will perform the OpenWRT initial setup with Habanero DVK from 8devices. It is a powerful router board, based on an IPQ4019 SoC from Qualcomm with a quad-core ARM Cortex A7 processor and 512 MB of RAM. It comes with a high-power, dual-band radio supporting 802.11ac Wave2 (2x2 MiMo). These initial configurations should be the same for other routers running OpenWRT. The video will show you how to setup the IP address for your NIC on the first access, how to change the hostname and timezone, how to update the firmware and how to turn on & configure Wifi with OpenWRT.

You like the board? Feel free to buy one at https://shop.8devices.com/Habanero-DVK

Video timeframe:

00:00 - Habanero Development Kit Introduction
00:31 - Habanero DVK connectors and Ethernet port assignment
02:25 - Setup computer's IP address for OpenWRT firt access
04:24 - Change timezone and hostname on OpenWRT
06:02 - Update OpenWRT firmware
07:50 - Turn on and Configure WiFi on OpenWRT
10:13 - OpenWRT realtime monitoring

I would like to take this chance to thanks 8devices for providing me the Habanero DVK. They are an official ADC (Authorized Design Center) of Qualcomm concentrating on IoE (Internet of Everything) products and projects based on Qualcomm chipsets for commercial and industrial applications. Just to make it short, they made goods SOM (System on Module) and router board / development kit that support OpenWRT. You can visit https://www.8devices.com to know more about them. To purchase the development kit and other products, please visit https://shop.8devices.com

If there is anything not clear or there is any question, feel free to leave it in the comment section and we will discuss.
As always, please like, share and subscribe to the channel to support me. Thank you!

Видео Habanero DVK Overview and OpenWRT Initial Setup канала Van Tech Corner