Anycubic Mono X REVIEW - Should you buy one!? My experience & printer mods

In this video, I discuss how I have been getting on with the Anycubic Mono X and perform one final (big) print before I decide whether or not to recommend it.

Do you have this machine, has your experience been different to mine? If you don't have this machine are you tempted to buy it? I'm interested to hear people's views, so do let me know in the comments down below.

Please note, Anycubic sent me this printer at a discounted rate for a review, however, all opinions are based on the full price for this machine. In the UK, it is possible to purchase this printer for as low as £600 if you don't mind waiting for shipping.

Pros:
- Massive build volume 192 x 120 x 245mm
- Fast print speeds (approx 1.5-3s per 50µm layer for LCD resins)
- Long-life LCD panel (approx 4000 hours @ 80% power)
- 8 x Test File Compatibility for resin dialling-in
- Quiet
- Easy to use UI
- 50µm Pixel Size (3840*2400 pixel 4K screen)

Cons:
- RELIABILITY, the bed design & levelling is not great
- No HEPA filter
- No heater
- Design constraint required for the bed & the lid to improve fit

Here is the link to the heater mat I installed: https://www.amazon.co.uk/AIICIOO-Reptile-Heat-Warmer-Thermostat/dp/B083HTFVDF/ref=sr_1_7?crid=23A12WRTF8WVI&dchild=1&keywords=reptile+heat+mat+with+thermostat&qid=1612819188&sprefix=reptile+heater+mat+with+%2Caps%2C167&sr=8-7

Here is the link for the backboard STL file: https://www.thingiverse.com/thing:4757829/files

Don't forget to subscribe and ring the bell so you are notified when I post my next video.

If you enjoyed this video and want to support me here's the link to buy me a coffee: https://www.buymeacoffee.com/callumcoles

#anycubic #3dprinting #review

Видео Anycubic Mono X REVIEW - Should you buy one!? My experience & printer mods канала Callum Coles