Making a round bench

I made a similar project five years ago and thought it would be cool to recreate it for youtube. I started by cutting 4.5 mm x 50 mm and 4.5 mm x 100 mm strips from 5 cm thick larch planks. After cutting, each strip was sanded on both sides down to 4 mm. 100 strips of various lengths went into each block to get final 40 cm wide bench seat. Strips are glued together using two component melamine glue in a mold previously cut on cnc. After drying, each block was cnc milled down to final shape. surfaces are sanded, corners are beveled, and transparent water based, uv resistant matte stain is applied. Legs that connect four wooden pieces together are made from steel pipes of various dimensions I found lying around the workshop. Each steel leg is cleaned and spray painted with two coats of oil based paint.

Thank you for watching and don't forget to like and subscribe! :D

My instagram: https://www.instagram.com/lignum_channel/?hl=en
My facebook:https://www.facebook.com/lignumchannel/

Music: Nimbus - Eveningland

Видео Making a round bench канала lignum