Using Adhesive Foam To Attach Insulated Plasterboard
First project in the bedroom is to insulate the outer wall of the house with insulated plasterboard attached with insta-stik foam. There are a lot of differing opinions on the best way to go about this project, with adhesive foam being a newer option that I thought I'd try out in this video, with what I think was great success and certainly quicker, easier and less mess than dot and dab plasterboard adhesive.
0:00 Intro
0:17 Prep work
2:45 Solid vs Cavity Walls
3:54 Internal vs External insulation
5:26 Options for Internal Insulation
7:01 Building Regs & U-value
8:12 Options for Attaching Insulated Plasterboard
8:42 Attaching with Insta-Stik Foam
11:26 Mechanical fixings
11:56 Window Reveals
12:30 Finishing Touches
13:04 Outro
𝐓𝐨𝐨𝐥𝐬
Foam gun (I like this one over the Screwfix version) https://amzn.to/2KzPe52
Multi-cutter https://bit.ly/3qzCR8q but I'd recommend cordless:
https://amzn.to/392QMxX
Drill
Putty/plaster knife for spreading acoustic sealant
𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬
Insulated plasterboard I used https://bit.ly/2NlOPUL
Insta-stik adhesive foam https://bit.ly/2N95Pxh
Hammer in fixings https://bit.ly/2Y170kt but I'd recommend:
https://bit.ly/38Yyj5j
Acoustic sealant https://amzn.to/35Xe4TT
🌍My website - https://www.alidymock.com
📸Instagram - https://instagram.com/alidymock
💌 Email - hello@alidymock.com
Видео Using Adhesive Foam To Attach Insulated Plasterboard канала Ali Dymock
0:00 Intro
0:17 Prep work
2:45 Solid vs Cavity Walls
3:54 Internal vs External insulation
5:26 Options for Internal Insulation
7:01 Building Regs & U-value
8:12 Options for Attaching Insulated Plasterboard
8:42 Attaching with Insta-Stik Foam
11:26 Mechanical fixings
11:56 Window Reveals
12:30 Finishing Touches
13:04 Outro
𝐓𝐨𝐨𝐥𝐬
Foam gun (I like this one over the Screwfix version) https://amzn.to/2KzPe52
Multi-cutter https://bit.ly/3qzCR8q but I'd recommend cordless:
https://amzn.to/392QMxX
Drill
Putty/plaster knife for spreading acoustic sealant
𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬
Insulated plasterboard I used https://bit.ly/2NlOPUL
Insta-stik adhesive foam https://bit.ly/2N95Pxh
Hammer in fixings https://bit.ly/2Y170kt but I'd recommend:
https://bit.ly/38Yyj5j
Acoustic sealant https://amzn.to/35Xe4TT
🌍My website - https://www.alidymock.com
📸Instagram - https://instagram.com/alidymock
💌 Email - hello@alidymock.com
Видео Using Adhesive Foam To Attach Insulated Plasterboard канала Ali Dymock
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How To Sound Proof a Party WallGround Level Up Brickwork to Floor joistsDIY Fitted Wardrobe Build with Basic Tools - Week 1How to Dot & Dab Insulated Plasterboard - a DIY GuideGarden Room Workshop Extra | How To Stop Mice Under Your Floor!How to Make a Concrete Sidewalk - Do It YourselfGarden Room Workshop: Part 12. Tyvek, Windows & DoorsApplication and installation of an external wall insulation systemHow to Set up a Wall PlateGarden Room Workshop: Part 17. Tape & JointingHow to build your own swimming pool. All process, step by step (in only 30 minutes).How To Build An Extension #1 ~ Ground WorkHow To Build A Frame Ledge and Brace Door Like A Pro. Side Gate.Garage Conversion Nearly Done With KCGarden Room Workshop Extra | Insulating A Concrete SlabFencing: The Ultimate Guide | Feather-edge Pales, Capping Rails & Cost! (3 of 3)HOW TO PLASTER A WALL | DIY Series | Build with A&ECabinetry Basics Part 2 - Screws or Nails? [#Ad][video 436]Garden Room Workshop: Part 10. Warm roofPutting up the Tyvek House wrap, render carrier board and tiling the side roof