Part #6B - Soldering Up the NEO-M8N GPS 📡 Unit for iNav [Omnibus F4 V2]

Howdy, in this episode we'll be soldering on the connectors to the GPS unit so that we can connect your NEO-M8N GPS bought here https://goo.gl/7Z3gh1 to your Omnibus F4 V2 flight control board https://goo.gl/bYpmjJ. The wiring colour codes are below in video description, Press SHOW MORE to see the FULL details, Matt

IMPORTANT
=========================
Double and triple check your wiring and if needs be do what I did and wrote the connections down on a piece of paper.

The colours of the wires from the GPS unit are the ones you pay attention to, NOT the colours on the wires from the JST SH connector.

You match the GPS wires to the ordering on the connector on the board. You can see the image I used in this episode here on Banggood https://goo.gl/ONfVAY

Wire Colour Coding
=========================
Below is the colour coding of the wires on the NEO-M8N GPS unit I bought here https://goo.gl/7Z3gh1 and this https://goo.gl/X42CZ8 is the right search on eBay for the 6 pin JST SH 1mm connector.

RED - This is the +5V wire

BLACK - This is the GND wire

WHITE - This is the Rx wire which is connected to Tx on the FC

YELLOW - This is the Tx wire which is connected to Rx on the FC

GREEN - This is the SCL wire (for the compass)

BLUE - This is the SDA wire (for the compass)

Using a Different GPS Unit?
================
If you are using a different GPS unit than this one https://goo.gl/7Z3gh1, then it's likely that the colour coding is going to be different.

So go very, VERY careful and consult your manual or the manufacturer to confirm the correct wiring.

Further Reading
================
I urge you to take a read of the iNav wiki that can be found here https://github.com/iNavFlight/inav/wiki and specifically the "Fixed Wing Guide" here https://github.com/iNavFlight/inav/wiki/Fixed-wing-guide.

RagTheNutsOff FaceBook Group
================

Can't get enough? Want to have a chat with other RC pilots from around the world?

Join the RC Coffee Chat "after-party" here https://www.facebook.com/groups/ragthenutsoff/

Note: Hit the JOIN button on the top right, I'll pick up your request to join as soon as I can!

Support This Channel
================
If you've enjoyed this video or the YouTube channel as a whole, you CAN help SUPPORT this channel by using the links below before buying on any of these sites.

Banggood: http://bit.ly/rtno-bg
GearBest: http://bit.ly/rtno-gb
eBay: http://bit.ly/rtno-ebay
Amazon UK: http://bit.ly/rtno-amz-uk

AliExpress: http://bit.ly/rtno-ae

These are "affiliate" links, which means I will gain a small percentage of the sale which can be put towards more models, RC parts or coffee.

If you would like to know more about how I started this channel by accident, see this video to find out more: https://www.youtube.com/watch?v=bmWc8vuFKx4

Matt

---
WANT MORE VIDEOS LIKE THIS ONE?
---
Subscribe here for the LATEST updates:
http://www.youtube.com/subscription_center?add_user=moggiex

For more videos like this one, see my YouTube Channel here:
https://www.youtube.com/user/moggiex/

Would you like to SEE THE NEW VIDEO'S BEFORE they're published on YouTube?
---
I post the videos in the FaceBalls group BEFORE they go live on YouTube.

You can join the group here:
https://www.facebook.com/groups/ragthenutsoff/

Видео Part #6B - Soldering Up the NEO-M8N GPS 📡 Unit for iNav [Omnibus F4 V2] канала RagTheNutsOff