How to Route IPv6 Basics with Packet Tracer
http://danscourses.com - In this tutorial, I cover IPv6 basics like address abbreviation, the IPv6 network prefix, the host ID, and EUI-64. In Packet Tracer I show how to set up IPv6 routing on a Cisco 1841 router between two subnets each having a host computer with autoconfigured IPv6 addresses.
For more information on this and other Cisco CCNA topics visit my website at http://danscourses.com. Please subscribe!
Видео How to Route IPv6 Basics with Packet Tracer канала danscourses
For more information on this and other Cisco CCNA topics visit my website at http://danscourses.com. Please subscribe!
Видео How to Route IPv6 Basics with Packet Tracer канала danscourses
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
IPv6 Static Routing | Cisco CCNA 200-301IPv6 Basics for BeginnersIPv6 Addresses Explained | Cisco CCNA 200-301IPv6 Fundamentals: A Brief Look at ICMPv6 Neighbor DiscoveryIPv6 Address Planing: How to Survive without NATSegment Routing IPv6 – The Network as A Computer and deployment use cases with Comcast8.2.5.3 Packet Tracer - Configuring IPv6 AddressingMultilayer Switching in Packet Tracer 6.1Configuring DHCP using Cisco iOS - DHCP Server & DHCP HelperBasic IPv6 addressing with Packet Tracer 6.0 - Part 1UKNOF42 - An Overview of IPv6 SecurityFREE URDU CCNA Lecture 19 Routing Part 1IPv6-03 IPv6 Neighbor Discovery, Multicast and DADNetwork#22: NAT - Overload (PAT)Introduction to Segment Routing - Suraj SoniIPv6 subnettingDHCP Services on a Router for the Cisco CCNA - Part 12.2.4.4 Packet Tracer - Configuring IPv6 Static and Default RoutesConfiguring RIP on IPv6 || RIP with IPv6 || IPv6 Routing