How to adjust the low speed needle on the Vittorazi Moster 185 carburetor. Scout user manuals.
It may sound like an impossible mission for some, but actually, it's not that complicated at all.
Adjusting your carburetor on your Moster can be done in a few easy steps, which we will show you in this very video. All you need is a small screwdriver and patience.
First, you need to be sure your carburetor is in good working condition, so if you know you didn't check it or cleaned it for more than one year, then a membrane replacement will be necessary. We have a very good video about that as well, check it out: https://www.youtube.com/watch?v=I6knavkgSbw&list=PL_h5-6xkVJYM1vqAMvfx55-MnWkduwdp4&index=11&t=469s
Now that your carburetor is cleaned and membranes are ok, you can start tuning it from scratch.
The factory settings for the Low-speed needle are 1/4 to 1/3 of a turn out from fully closed. Pay attention when you close it all the way in, just make it snug, as if you tighten it too much you can damage the seat of the needle inside the carb body.
Then, just adding throttle abruptly while having your paramotor secured on your back, and watch the engine response. Close the Low-speed needle by 1-2 minutes at a time until it will start hesitating when pinching the throttle. Then, go 1-2 minutes back and you are done. As simple as that.
Once your Low-speed needle is adjusted, it's time to set the idle RPM screw and your engine will be happy 100%.
Feel free to have any question at info@scoutparamotor.com
Hey! Did you know we offer FULL MONEY BACK GUARANTEE with every Scout purchased? Find out more here: https://www.scoutparamotor.com/suppor...
Are you grounded and you need some spare parts for your paramotor? You will find all you need here, next day shipping: https://eshop.scoutparamotor.com/
You have some questions or even some problems? We are ready to help you. Ask for help directly! : https://www.scoutparamotor.com/support/
Check if there is a SCOUT dealer near you: https://www.scoutparamotor.com/dealer...
Do you have some cool adventure that you want desperately to do, but you don't have sufficient funds? We have something just for you here: https://adventurewingman.org/
Like our Facebook page: https://www.facebook.com/SCOUT-paramo...
Instagram: https://www.instagram.com/scoutparamo...
Music: https://soundcloud.com
Видео How to adjust the low speed needle on the Vittorazi Moster 185 carburetor. Scout user manuals. канала SCOUT paramotor
Adjusting your carburetor on your Moster can be done in a few easy steps, which we will show you in this very video. All you need is a small screwdriver and patience.
First, you need to be sure your carburetor is in good working condition, so if you know you didn't check it or cleaned it for more than one year, then a membrane replacement will be necessary. We have a very good video about that as well, check it out: https://www.youtube.com/watch?v=I6knavkgSbw&list=PL_h5-6xkVJYM1vqAMvfx55-MnWkduwdp4&index=11&t=469s
Now that your carburetor is cleaned and membranes are ok, you can start tuning it from scratch.
The factory settings for the Low-speed needle are 1/4 to 1/3 of a turn out from fully closed. Pay attention when you close it all the way in, just make it snug, as if you tighten it too much you can damage the seat of the needle inside the carb body.
Then, just adding throttle abruptly while having your paramotor secured on your back, and watch the engine response. Close the Low-speed needle by 1-2 minutes at a time until it will start hesitating when pinching the throttle. Then, go 1-2 minutes back and you are done. As simple as that.
Once your Low-speed needle is adjusted, it's time to set the idle RPM screw and your engine will be happy 100%.
Feel free to have any question at info@scoutparamotor.com
Hey! Did you know we offer FULL MONEY BACK GUARANTEE with every Scout purchased? Find out more here: https://www.scoutparamotor.com/suppor...
Are you grounded and you need some spare parts for your paramotor? You will find all you need here, next day shipping: https://eshop.scoutparamotor.com/
You have some questions or even some problems? We are ready to help you. Ask for help directly! : https://www.scoutparamotor.com/support/
Check if there is a SCOUT dealer near you: https://www.scoutparamotor.com/dealer...
Do you have some cool adventure that you want desperately to do, but you don't have sufficient funds? We have something just for you here: https://adventurewingman.org/
Like our Facebook page: https://www.facebook.com/SCOUT-paramo...
Instagram: https://www.instagram.com/scoutparamo...
Music: https://soundcloud.com
Видео How to adjust the low speed needle on the Vittorazi Moster 185 carburetor. Scout user manuals. канала SCOUT paramotor
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Paramotor Carb rebuild Walbro carburetor service WB37](https://i.ytimg.com/vi/2F4psyZi9dU/default.jpg)
![Paramotor Tips & Tricks - Throttle Adjustment on a Powered Paraglider](https://i.ytimg.com/vi/3gW2yfsZ2Lc/default.jpg)
![Vittorazi Moster Plus 185 carburetor membrane replacement. Paramotor engine maintenance series.](https://i.ytimg.com/vi/I6knavkgSbw/default.jpg)
![How To Launch A Paramotor!](https://i.ytimg.com/vi/azFaPlle4bA/default.jpg)
![Carburator Tuning A Moster 185 Paramotor and Testing Out Spicy Conditions](https://i.ytimg.com/vi/XhvIu2rx2r0/default.jpg)
![2 Stroke Carburetor | How to Tune | How it Works | Basic Principles](https://i.ytimg.com/vi/7pQ6Vir1uxc/default.jpg)
![How to tune a Paramotor, 2 stroke engine mixture adjustment](https://i.ytimg.com/vi/gKocmc-qTJo/default.jpg)
![Comparing my Paramotors: Most Affordable vs Most Expensive](https://i.ytimg.com/vi/mwfnbvqIIYE/default.jpg)
![Paramotor NC - Full Flight and Tips/Tricks - Episode 23 #ParamotorNC #PPG #Paramotor](https://i.ytimg.com/vi/JfCshmY5tBg/default.jpg)
![I Upgraded My Paramotor With This INSANE Engine!!!](https://i.ytimg.com/vi/AuPAEiT_lsM/default.jpg)
![Skybolt Paramotor is a TORQUE MONSTER!](https://i.ytimg.com/vi/uGkbOimCJL0/default.jpg)
![Vittorazi Moster Plus spark plug replacing and reading. Paramotor engine maintenance](https://i.ytimg.com/vi/DVghSL93Qlg/default.jpg)
![How to Adjust Your Paramotor Carburetor](https://i.ytimg.com/vi/BNlQvzTfip0/default.jpg)
![SIV Day One! Alayna Throws Her Reserve!](https://i.ytimg.com/vi/meZyGkKGxf8/default.jpg)
![Why my Moster is idling at high RPM, and how to fix it. Scout user manuals.](https://i.ytimg.com/vi/b-nUkw4uTZE/default.jpg)
![Vittorazi moster plus reed valve petals replacement. Paramotor engine maintenance series](https://i.ytimg.com/vi/aioEq8sdUgw/default.jpg)
![Gravity Paramotor- Defiant Unbox, Build, First Impression](https://i.ytimg.com/vi/Rz6456aHEFE/default.jpg)
![Vittorazi Moster plus bronze bushing replacement. Paramotor engine maintenance (Exhaust group)](https://i.ytimg.com/vi/Af7gNMLO7nQ/default.jpg)
![Setting up and Breaking in the Parajet Maverick Moster 185+](https://i.ytimg.com/vi/s_9TZyxL_ac/default.jpg)
![Vittorazi Moster Plus ignition coil testing and replacement. paramotor engine maintenance series](https://i.ytimg.com/vi/hLlxHJp3otw/default.jpg)