Simple Twisted Ring Tutorial/ Copper Wire Wrapped Ring/ DIY in 5 steps/ Beginner Level

💍 Make your own ring at home in just 5 steps!

💡 A very fast and easy project to create an inexpensive wire ring,

💰 You can quickly make a ton of these from bits of wire left over from other projects.
🌺 For 7.5 (us) ring size you will need approximatively:

- 30 cm (12 inch) x 0,8 mm (20g) copper round wire
- 8cm (3 inch) x 0,4 mm (26g) copper round wire
- 0,3 mm faceted gemstone bead (you can chose a bigger one if you prefer it)

1. Twist the wires
- Take the 0,8 (20g) round wire and roughly fold in half into a fish shape.
- Twist the ‘tail’ and bend the wire ends outwards.
- Begin to twist the body of the fish whilst holding the tail.
- Continue to twist until until you have a long wire with a little bobble at the end.

2. Hammer Flat
- Give your wire wrap rings a hammered texture.

3. Trim and File
- Cut the excess of the wire and o file the ends flat
(for 7.5 size you will need aprox 8cm wire/3.5”)

4. Size
- Wrap the wire around the ring mandrel so the ends cross.

5. Add the stone
- Take the 0,4 mm (26g) wire and wrap the gemstone

Oxidize or patina the finished ring. (optional)

🔔 Love this tutorial?!
Share it and tag on Instagram @akka.jewelry to be featured in my stories.
and Subscribe for more!

Видео Simple Twisted Ring Tutorial/ Copper Wire Wrapped Ring/ DIY in 5 steps/ Beginner Level канала AKKA Jewelry