DIY: C7 Audi A6 Front & Rear Sway Bar and End Link install

We are stoked to bring you our DIY video on installing the Eurocode front and rear Sway Bars including their Front (adjustable) & Rear end links. Some things to take note of:

1) Convince a friend to help you out. This install is a good deal harder to accomplish by yourself

2) Take note of the orientation of your OEM sway bars before your remove them so you can get your new bars aligned the same way. Take pictures to reference for later on.

3) When you are tightening the bolts for the brackets on the sway bars, make sure you tighten them evenly before torquing them down. Don't just tighten the bottom bolt, and then tighten the top bolt. Go back and forth as you tighten.

4) If you are using aftermarket end links with polyurethane bushings and spherical joints that can spin freely, you do NOT have to torque everything under load. Since the parts can move freely, you won't have an issue. BUT, if you are using the OEM rubber bushings, you need to torque them under load as there is no free movement in those, and there is only a maximum amount of travel they can handle.

5) This DIY will also work for the B8/B8.5 S4 as well! There should only be very minor differences.

6) After posting this video and speaking with Eurocode about a couple things pertaining to the install, they informed me that the Dust Boots/Debris Covers on the endlinks need to be filled with Marine Grease to prevent premature wear of the bearings and stop any dirt from getting in. This wasn't listed on any directions in their installation PDF's on their website, so I didn't do it. Luckily, these are easy to access and I should be able to use a small plastic syringe to inject them with grease. I'll edit this after I do that to report back if it works or not.

Eurocode Installation Guide: https://bit.ly/33siwXE
Eurocode Sway Front/Rear Sway Bars: https://bit.ly/2MVkOsH
Eurocode Rear End Links: https://bit.ly/2TnKL5j
Eurocode Adjustable Front End Links: https://bit.ly/2MdShPw
Eurocode Dust Boot Covers: https://bit.ly/2N6mq31

If you have a lowered car, you will want to pick up the Rear Fitment Kit from Eurocode: https://bit.ly/2Mf47IY

Audizine Thread (more useful information): https://bit.ly/2TmGPlr

Let us know how you like the video in the comments below!
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Follow us on Instagram: https://www.instagram.com/audic7owners/
-----------------------------------------------------------------------------------------------------------------------------------------------------------------

Видео DIY: C7 Audi A6 Front & Rear Sway Bar and End Link install канала Audi C7 Owners International