Woodland Mills HM126 bandsaw sawmill upgrading to a polyurethane belt
This stuff is dangerous! Although the mill itself has all the dangers of a bandsaw, and the blade should be avoided due to obvious reasons, the most dangerous aspect of milling is log / cant handling. Please be careful! Working with bearings and pullers can create all kinds of forces and danger, I am not responsible for improper techniques! Working with sharp blades needs to be done with extreme care. Please be careful!
Up today is the replacement of the non driven wheel belt on my hm126. I have a regular v belt that is too small, and the next size up was too big. I suspect the smaller belt is correct, but they don't have much stretch to them and since I don't have a proper machine, are basically impossible to mount. Enter POLY V Belt .... this one has stretch and according to Woodland Mills, will last 5x as long. I started using my mill in 2013, and so it has been through 4 seasons of use. So I anticipate replacing the next belt in 20 years... 2037? yikes. Anyway, just need some clamps here and a couple large screwdrivers and you are good! Thanks for watching!
Видео Woodland Mills HM126 bandsaw sawmill upgrading to a polyurethane belt канала Matthew Olson
Up today is the replacement of the non driven wheel belt on my hm126. I have a regular v belt that is too small, and the next size up was too big. I suspect the smaller belt is correct, but they don't have much stretch to them and since I don't have a proper machine, are basically impossible to mount. Enter POLY V Belt .... this one has stretch and according to Woodland Mills, will last 5x as long. I started using my mill in 2013, and so it has been through 4 seasons of use. So I anticipate replacing the next belt in 20 years... 2037? yikes. Anyway, just need some clamps here and a couple large screwdrivers and you are good! Thanks for watching!
Видео Woodland Mills HM126 bandsaw sawmill upgrading to a polyurethane belt канала Matthew Olson
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Woodland Mills HM126 bandsaw bandwheel bearing replacement #2](https://i.ytimg.com/vi/wsZbRuSpPFQ/default.jpg)
![Woodland Mills Sunday morning milling](https://i.ytimg.com/vi/id_9NiKGJuo/default.jpg)
![2016 HM126 Portable Sawmill In Action](https://i.ytimg.com/vi/wspG1oMwpQU/default.jpg)
![Blade tracking on woodlandmills sawmill](https://i.ytimg.com/vi/Eu0EOpaJROI/default.jpg)
![Sawmill Operation 101](https://i.ytimg.com/vi/DhpAqzRwymM/default.jpg)
![Scott and Christi's HM126 Sawmill 'Thank You' Video](https://i.ytimg.com/vi/udEEilr1fu0/default.jpg)
![Woodland Mills Blade Change & Tracking Video](https://i.ytimg.com/vi/3ryI__egVdQ/default.jpg)
![From a Woodland Mills HM126 sawmill to a fully hydraulic Wood-Mizer LT35](https://i.ytimg.com/vi/dObODXgnsL4/default.jpg)
![The Truth about the Woodland Mills HM126](https://i.ytimg.com/vi/DV1XjtELUVw/default.jpg)
![Features + Review - Woodland Mills HM 126 Bandsaw Sawmill](https://i.ytimg.com/vi/QDTyrQrZFqc/default.jpg)
![Final Assembly of Woodland Mills Sawmill & Processing our first log](https://i.ytimg.com/vi/EKb_KvAEclM/default.jpg)
![Woodland Mills HM126 Anniversary Edition Portable Sawmill - Overview (2020)](https://i.ytimg.com/vi/2nt4KQOJVBs/default.jpg)
![Woodland Mills HM126 & 2x6 Girts Pole Barn](https://i.ytimg.com/vi/h7A-cdkdETg/default.jpg)
![Woodland Mills HM126 bandsaw bandwheel bearing replacement](https://i.ytimg.com/vi/8YDQdnIepKE/default.jpg)
!['Social Distancing' Milling Siding for Tool Shed with The Woodland MIlls HM130 Max](https://i.ytimg.com/vi/YT4wW80Yeto/default.jpg)
![How to setup Woodland Mills HM126... unboxing and tips.](https://i.ytimg.com/vi/cqAvMb6P0vA/default.jpg)
![Portable Sawmills- Are they worth the money?- Woodland Mills HM126](https://i.ytimg.com/vi/vO33gVebWtE/default.jpg)
![Milling red oak with the Woodland Mills HM126 14hp](https://i.ytimg.com/vi/7fnkBOUYEqA/default.jpg)
![IT'S AMAZING Woodland mills HM126 first cuts](https://i.ytimg.com/vi/RIFDwiF93a8/default.jpg)
![Woodland Mills HM126 Bandsaw lube system update and milling some 2x12s](https://i.ytimg.com/vi/1hyPdVrPT7Y/default.jpg)