Ford Ranger EGR Blanking Plate BEST Installation Guide also PX, Mazda BT50 2.2 L & 3.2 L
Thanks for checking out this vid
I am currently a totally unsponsored channel and do these videos completely free which take 6 or more hrs to make, so if this video has helped you out please consider buying us a coffee to say thanks: https://paypal.me/interestingproducts
And again make sure you subscribe to my channel!
Also if anyone is selling EGR blanks that would like to have a product listed here for our subscribers please let me know.
FULLY UPDATED FROM OUR ORIGINAL VIDEO THAT HS OVER 72,000 VIEWS
NOW WITH EXTRA COMMENTARY HELP AND EXTRA FOOTAGE.
We couldn’t find any video's or even half decent photo instructions anywhere on the internet so i decided to do the research and tackle it myself.
It also sounds like I said TX Ranger but it’s definitely PX haha.
So here is the Australian Ford Ranger “PX” MK1 EGR Blanking Plate Block off installation video I made to help out fellow YouTubers. I use YouTube a lot so thought I’d pay some back.
- suits Ford Ranger & Mazda BT50 B32 PUMA TDCi 3.2L and 2.2L 2011-ON. MK1 Australian Version but also will be useful for most EGR systems.
EGR valve replacement
Ford Ranger EGR valve replacement
The Exhaust Gas Recirculation (EGR) valve recirculates a portion of the exhaust gas that would normally just go through your Ford Ranger’s exhaust system, it mixes the exhaust gases in with the freshly made air inside the intake manifold just before the main inlet on top of your engine. These gases are then burned off in the normal combustion process.
Reducing the volume of emissions going through an exhaust system does lengthen the life of the catalytic converter and helps the environment.
Most modern vehicles have an EGR valve.
ISSUES:
The PX Ford Rangers EGR valve can fail once it is full of gunk and/or the valve gets stuck open. When this happens the EGR valve will need to be replaced which is not cheap.
Its also an electric motor activated EGR valve so there could be an issue with the wiring.
When the EGR valve fails, the Ford Ranger’s check engine warning light will usually illuminate on the dash and the vehicle may run rough because the engine may run lean or rich, depending on why the valve has failed.
Q. What is an Exhaust Gas Recirculation (EGR) valve?
A. The EGR valve controls a passageway between the intake and exhaust manifolds. When the EGR valve opens, exhaust gasses flow from the exhaust manifold through the valve and into the intake manifold, keeping NOx emissions within state limits.
Q. Why block off the EGR supply port?
A. To keep your intake and engine CLEAN & PERFORMANCE HIGH
A. These hot, oxygen-depleted, exhaust gases displace (dilute) the cooler incoming oxygen-rich air and has a quenching effect on combustion and combustion temperatures. This reduces engine performance and raises intake air temperatures dramatically.
Q. What are the benefits of blocking the EGR passageway?
A. Many.
1) Cooler intake air temps.
2) More performance.
3) Less engine oil contamination.
4) Cleaner engine oil means increased engine life.
5) Cooler exhaust temps.
6) No Soot in intake which keeps vacuum / boost lines clean
Q. What are the negatives of blocking the EGR passageway?
A. Not Much
/TOOLS & SERVICES I USE:
○ Where I find my music (Epidemic) - https://www.epidemicsound.com/referral/daqbi4/
And make sure you subscribe to my channel!
Enjoy!
Copyright © 2020 Remotely Interesting. All rights reserved.
No part of this video (including thumbnail images or written copy) may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the written permission of the copyright holder.
All music contained in the video has had the granting of a ROYALTY-FREE LICENSE
Видео Ford Ranger EGR Blanking Plate BEST Installation Guide also PX, Mazda BT50 2.2 L & 3.2 L канала Remotely Interesting
I am currently a totally unsponsored channel and do these videos completely free which take 6 or more hrs to make, so if this video has helped you out please consider buying us a coffee to say thanks: https://paypal.me/interestingproducts
And again make sure you subscribe to my channel!
Also if anyone is selling EGR blanks that would like to have a product listed here for our subscribers please let me know.
FULLY UPDATED FROM OUR ORIGINAL VIDEO THAT HS OVER 72,000 VIEWS
NOW WITH EXTRA COMMENTARY HELP AND EXTRA FOOTAGE.
We couldn’t find any video's or even half decent photo instructions anywhere on the internet so i decided to do the research and tackle it myself.
It also sounds like I said TX Ranger but it’s definitely PX haha.
So here is the Australian Ford Ranger “PX” MK1 EGR Blanking Plate Block off installation video I made to help out fellow YouTubers. I use YouTube a lot so thought I’d pay some back.
- suits Ford Ranger & Mazda BT50 B32 PUMA TDCi 3.2L and 2.2L 2011-ON. MK1 Australian Version but also will be useful for most EGR systems.
EGR valve replacement
Ford Ranger EGR valve replacement
The Exhaust Gas Recirculation (EGR) valve recirculates a portion of the exhaust gas that would normally just go through your Ford Ranger’s exhaust system, it mixes the exhaust gases in with the freshly made air inside the intake manifold just before the main inlet on top of your engine. These gases are then burned off in the normal combustion process.
Reducing the volume of emissions going through an exhaust system does lengthen the life of the catalytic converter and helps the environment.
Most modern vehicles have an EGR valve.
ISSUES:
The PX Ford Rangers EGR valve can fail once it is full of gunk and/or the valve gets stuck open. When this happens the EGR valve will need to be replaced which is not cheap.
Its also an electric motor activated EGR valve so there could be an issue with the wiring.
When the EGR valve fails, the Ford Ranger’s check engine warning light will usually illuminate on the dash and the vehicle may run rough because the engine may run lean or rich, depending on why the valve has failed.
Q. What is an Exhaust Gas Recirculation (EGR) valve?
A. The EGR valve controls a passageway between the intake and exhaust manifolds. When the EGR valve opens, exhaust gasses flow from the exhaust manifold through the valve and into the intake manifold, keeping NOx emissions within state limits.
Q. Why block off the EGR supply port?
A. To keep your intake and engine CLEAN & PERFORMANCE HIGH
A. These hot, oxygen-depleted, exhaust gases displace (dilute) the cooler incoming oxygen-rich air and has a quenching effect on combustion and combustion temperatures. This reduces engine performance and raises intake air temperatures dramatically.
Q. What are the benefits of blocking the EGR passageway?
A. Many.
1) Cooler intake air temps.
2) More performance.
3) Less engine oil contamination.
4) Cleaner engine oil means increased engine life.
5) Cooler exhaust temps.
6) No Soot in intake which keeps vacuum / boost lines clean
Q. What are the negatives of blocking the EGR passageway?
A. Not Much
/TOOLS & SERVICES I USE:
○ Where I find my music (Epidemic) - https://www.epidemicsound.com/referral/daqbi4/
And make sure you subscribe to my channel!
Enjoy!
Copyright © 2020 Remotely Interesting. All rights reserved.
No part of this video (including thumbnail images or written copy) may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the written permission of the copyright holder.
All music contained in the video has had the granting of a ROYALTY-FREE LICENSE
Видео Ford Ranger EGR Blanking Plate BEST Installation Guide also PX, Mazda BT50 2.2 L & 3.2 L канала Remotely Interesting
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to clean a throttle body on a Ford Ranger, Mazda BT 50, Ford Ranger Raptor, Ford Everest DIY](https://i.ytimg.com/vi/t0LZrDDPZVY/default.jpg)
![SHOULD YOU REMOVE YOUR DPF? How it affects power gains & fuel use - You won't believe the difference](https://i.ytimg.com/vi/M6v7fvJiXL8/default.jpg)
![Ranger PX mk1 EGR cooler water pipe bypass](https://i.ytimg.com/vi/nLPZHcel20E/default.jpg)
![EGR Delete or EGR Cooler?](https://i.ytimg.com/vi/3DIQ-2H785c/default.jpg)
![How to: Fit a EGR Blanking Plate on a Diesel Engine](https://i.ytimg.com/vi/29JGybRVaUk/default.jpg)
![BT50 / Ranger Limp Mode Intercooler Hose Problem | Fault P00BD](https://i.ytimg.com/vi/g3f6YuePEZk/default.jpg)
![Px1 Ford Ranger 3.2 egr cooler is junk, making a blanking plate](https://i.ytimg.com/vi/zxbdEWD0otg/default.jpg)
![Diesel Tuning - EGR Delete](https://i.ytimg.com/vi/f3dDbpC-vi0/default.jpg)
![Liquimoly Diesel Engine Intake Decarb. Should you ?](https://i.ytimg.com/vi/VxAmVtpm5Pc/default.jpg)
![CATCH CANS & EGR explained in detail! Why your diesel’s clogging up & losing power - how to fix it](https://i.ytimg.com/vi/f4_dW98oJ1A/default.jpg)
![The truth about Ford Ranger Mazda BT 50 10min oil change time limit | Auto Expert John Cadogan](https://i.ytimg.com/vi/B_5zb918uQ4/default.jpg)
![Ford Ranger: EGR Cooler Fault](https://i.ytimg.com/vi/wazX0FYoLxw/default.jpg)
![Ford pk ranger egr delete](https://i.ytimg.com/vi/D1Wf3PeDXQI/default.jpg)
![How to fix EGR Soot Buildup in a Turbo Diesel](https://i.ytimg.com/vi/EwODnz0nHY0/default.jpg)
![HOW TO FIT A CATCH CAN & FUEL WATER SEPERATOR FILTER TO A BT50 | DIY install on a 2017 Mazda BT50](https://i.ytimg.com/vi/sly2GIHZmCI/default.jpg)
![Ford Ranger Engine Mods - (Performance With A Huge Difference )](https://i.ytimg.com/vi/nH8UCsUEFyc/default.jpg)
![Fitting a Ford Ranger EGR delete kit - mk1/2Ranger and B2500](https://i.ytimg.com/vi/-1Vr53tA00s/default.jpg)
![EGR Blanking Part 02 - Pipework Delete (Ford Ranger TDI) | Tech Tip 22](https://i.ytimg.com/vi/IvXYYLtHZ84/default.jpg)
![Liqui Moly Diesel de-carb Ford Ranger 3.2TD clogged diesel](https://i.ytimg.com/vi/zH05vbmD7j8/default.jpg)
![One Month After Blaning EGR](https://i.ytimg.com/vi/WFfhcTov5Tk/default.jpg)