Wood window sill, capping w/PVC aluminum trim coil (discussion)
dear viewer,
Making the side casings a little bigger, will make room for the three folds on the sill trim end, when you fold them into there place, the bottom flap 1st, the face flap second, and the top flap last.
I hope this helps....
On this channel is enough information to begin to learn how to do aluminum trim, BUT, it takes practice.... so start with short pieces and do half of a casing, or half of a window sill, GET USED to using a speed square, to mark cut, or fold locations all the way around pieces, and learn for yourself to allow for where your lines will be located..
may you have success, I hope this helps, thanks, for stopping by, Len
I sometimes put the sill on first, then I hook my tape on the inside edge of the casing, and measure over to (three folds on the sill aluminum, it take time/practice...
Видео Wood window sill, capping w/PVC aluminum trim coil (discussion) канала Len David Hart
Making the side casings a little bigger, will make room for the three folds on the sill trim end, when you fold them into there place, the bottom flap 1st, the face flap second, and the top flap last.
I hope this helps....
On this channel is enough information to begin to learn how to do aluminum trim, BUT, it takes practice.... so start with short pieces and do half of a casing, or half of a window sill, GET USED to using a speed square, to mark cut, or fold locations all the way around pieces, and learn for yourself to allow for where your lines will be located..
may you have success, I hope this helps, thanks, for stopping by, Len
I sometimes put the sill on first, then I hook my tape on the inside edge of the casing, and measure over to (three folds on the sill aluminum, it take time/practice...
Видео Wood window sill, capping w/PVC aluminum trim coil (discussion) канала Len David Hart
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Perfect vinyl siding corner post guide?](https://i.ytimg.com/vi/i71WnTLe9Kc/default.jpg)
![measure short points easily](https://i.ytimg.com/vi/1PJCnaBKACw/default.jpg)
![Bay window roof framing](https://i.ytimg.com/vi/p6HkrL7f4OI/default.jpg)
![cement siding repair tips](https://i.ytimg.com/vi/VX8eznB2FoA/default.jpg)
![door hinge gauge](https://i.ytimg.com/vi/veLebYJv8yo/default.jpg)
![replacement window preparation (removal)](https://i.ytimg.com/vi/LffdgH8II4s/default.jpg)
![window replacement preparation (removal)](https://i.ytimg.com/vi/cv8yH68lSwM/default.jpg)
![start sheet metal siding screws FAST](https://i.ytimg.com/vi/CLne0LTcG6k/default.jpg)
![shingled roof into vinyl sided wall (flashing detail)](https://i.ytimg.com/vi/V1U9OEvZh9E/default.jpg)
![aluminum coil stock management](https://i.ytimg.com/vi/C8Wncvf87Vw/default.jpg)
![efficiency on tapco brake](https://i.ytimg.com/vi/8c6fnB-05s8/default.jpg)
![cutting aluminum trim, tapco brake use](https://i.ytimg.com/vi/TJQMrGxJ-uE/default.jpg)
![tapco pro brake](https://i.ytimg.com/vi/3psZdIJ1NiA/default.jpg)
![cuttin' aluminum coil off the roll](https://i.ytimg.com/vi/Rsz7mLQ9U64/default.jpg)
![No° 199 Stanley utility knife](https://i.ytimg.com/vi/AS-uYWGuu8M/default.jpg)
![make aluminum trim longer than your brake](https://i.ytimg.com/vi/saM_6DUcJ3c/default.jpg)
![wooden door jack](https://i.ytimg.com/vi/oiOHvd46ZPo/default.jpg)
![cutting vinyl siding by hand on the wall](https://i.ytimg.com/vi/rb7JXQ4kglU/default.jpg)
![Get your 5/4" casing flat for aluminum trim](https://i.ytimg.com/vi/BtaGC2KU8ag/default.jpg)
![1966 or so Tapco brake](https://i.ytimg.com/vi/u6RnX9WI3TQ/default.jpg)
![some reasons to watch my brake videos](https://i.ytimg.com/vi/z0BjNyL1dnw/default.jpg)