Shed ⇒ Workshop. Part 10 - Lighting, electrical and pneumatic installation

In this part, we finally finish the project of changing the shed to the workshop.
It was a long and sometimes hard adventure but I think doing new projects will be a little easier and more enjoyable.
We used 10 lamps to make the lighting. 5 would be enough for a normal work, but we had to use more lamps to make the quality of the videos acceptable.
The wires in all single-phase sockets are 3x2.5mm2.
half of the sockets are connected to one phase and the other half to the other. Thanks to this, there should be no heavy loads on the wires.
We used 5x5mm2 cables for three-phase sockets.
In the electric distribution box we used:

Three-phase differential current fuse
2x Single-phase differential current fuse
20A, 2x16A and 10A overload switches.
Three-phase Overvoltage limiter

To make the pneumatic installation, we used a polyurethane hose and quick couplings.

Видео Shed ⇒ Workshop. Part 10 - Lighting, electrical and pneumatic installation канала Made in Poland