Four ways to beat moire on your 3D printer
Moire can ruin an otherwise beautiful 3D print.This artefact is caused by irregular extruder steps or pulses, leaving a repeating pattern on the surface. It can be really tricky to tune out, with different printers experiencing it for different reasons. My Cocoon Create Touch / Wanhao Duplicator i3 Plus / Monoprice Makerselect has it worse than most printers out there, exacerbated by the accuracy of the flexion extruder.
In this guide, I’ll show you four potential solutions for beating moire. With any luck one or more of them will fix your problem. Fortunately, only one needs to work!
There are a lot of theories on why moire exists, and this is beyond the scope of this video. For this reason I’ve kept it simple, so keep this in mind before commenting. The example of the rounding teps is grossly simplified too which I am aware of. This video is about solutions, not problems.
Thanks to Shrodinger Z for inventing (and thoroughly documenting) the TL-smoother.
Adjusting Di3 stepper vref: https://3dprinterwiki.info/setting-the-stepper-current-on-the-melzi-board/
Shrodinger Z blog post (inventor of the TL-smoother): http://cabristor.blogspot.com/2015/02/drv8825-missing-steps.html
eBay listing for TL-smoother: https://www.ebay.com.au/itm/1pcs-5pcs-TL-Smoother-Kit-Addon-Module-Four-Pak-For-3D-Printer-Motor-Drivers/122845196835?ssPageName=STRK%3AMEBIDX%3AIT&var=423296378051&_trksid=p2057872.m2749.l2649
Duplicator i3 plus TL-Smoother Extruder mount: https://www.thingiverse.com/thing:2801265/
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Gearbest affiliate link (help support the channel): https://www.gearbest.com/?lkid=13807527
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
Видео Four ways to beat moire on your 3D printer канала Teaching Tech
In this guide, I’ll show you four potential solutions for beating moire. With any luck one or more of them will fix your problem. Fortunately, only one needs to work!
There are a lot of theories on why moire exists, and this is beyond the scope of this video. For this reason I’ve kept it simple, so keep this in mind before commenting. The example of the rounding teps is grossly simplified too which I am aware of. This video is about solutions, not problems.
Thanks to Shrodinger Z for inventing (and thoroughly documenting) the TL-smoother.
Adjusting Di3 stepper vref: https://3dprinterwiki.info/setting-the-stepper-current-on-the-melzi-board/
Shrodinger Z blog post (inventor of the TL-smoother): http://cabristor.blogspot.com/2015/02/drv8825-missing-steps.html
eBay listing for TL-smoother: https://www.ebay.com.au/itm/1pcs-5pcs-TL-Smoother-Kit-Addon-Module-Four-Pak-For-3D-Printer-Motor-Drivers/122845196835?ssPageName=STRK%3AMEBIDX%3AIT&var=423296378051&_trksid=p2057872.m2749.l2649
Duplicator i3 plus TL-Smoother Extruder mount: https://www.thingiverse.com/thing:2801265/
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Gearbest affiliate link (help support the channel): https://www.gearbest.com/?lkid=13807527
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
Видео Four ways to beat moire on your 3D printer канала Teaching Tech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Arc Welder - Smoother, Faster, Better 3D Prints! Its like magic to improve your 3D Print quality.](https://i.ytimg.com/vi/18uYYXecH5g/default.jpg)
![Linear advance guide - Free and easy print quality improvement](https://i.ytimg.com/vi/n3yK0lJ8TWM/default.jpg)
![3D Printer Belt Tension Effects on Creality Ender 3](https://i.ytimg.com/vi/_m9TTzEh5xM/default.jpg)
![3D Printing 101: Troubleshooting a Bad Print / Installing a New Nozzle](https://i.ytimg.com/vi/_iezWhLYESs/default.jpg)
![Finishing 3D Prints: How to Add LED Lenses to 3D Printed Helmets](https://i.ytimg.com/vi/nnC9LMrBEVU/default.jpg)
![We solved this common problem in 3D printing](https://i.ytimg.com/vi/-et5eMyLlUs/default.jpg)
![Creality Ender 3 V2 - Simple Tips for Super Clean 3D Prints](https://i.ytimg.com/vi/6Z02BowhQwU/default.jpg)
![](https://i.ytimg.com/vi/QCeYpW48R6o/default.jpg)
![Mandatory Maintenance for your 3D Printer](https://i.ytimg.com/vi/0qBteLSJTtU/default.jpg)
![THIS IS Y](https://i.ytimg.com/vi/AKTvykTPjQw/default.jpg)
![Extrusion Width - The magic parameter for strong 3D prints?](https://i.ytimg.com/vi/9YaJ0wSKKHA/default.jpg)
![Cura Fuzzy Skin and Ironing on 3D Prints](https://i.ytimg.com/vi/gh5wC4Ti95s/default.jpg)
![5 Reasons you need a (good) 3D printing pen + GIVEAWAY](https://i.ytimg.com/vi/tgCqeomSQWo/default.jpg)
![(How) I finally got rid of these blobs!](https://i.ytimg.com/vi/Hvw3DrVAeTA/default.jpg)
![Ghosting in 3D Prints - What is it and how do you fix it?](https://i.ytimg.com/vi/KaFp6Eqk0QI/default.jpg)
![Quieten your 3D printer with stepper motor dampers: Ender 3 tests](https://i.ytimg.com/vi/vu80vctXaxQ/default.jpg)
![Remove ringing by tuning acceleration and junction deviation - step by step guide](https://i.ytimg.com/vi/Mnvj6xCzikM/default.jpg)
![Why direct drive is not automatically better than bowden tube](https://i.ytimg.com/vi/ybTbuUBy2-s/default.jpg)
!["Vertical Fine Artifacts" / 0.9 Stepper Upgrade / before & after](https://i.ytimg.com/vi/YwAikilAovw/default.jpg)
![How to Control Seams In Cura Slicer Settings](https://i.ytimg.com/vi/NU1kYEE3qrQ/default.jpg)