Original Prusa I3 MK3 Review
After a long wait, it's time to give you my view on the latest addition in the Prusa Family
🛒 Prusa I3 MK3 Kit: http://geni.us/PrusaI3MK3Kit
🛒 Prusa I3 MK3 Assembled: http://geni.us/PrusaI3MK3Assembled
🛒 Prusa I3 MK2S Kit: http://geni.us/PrusaI3MK2S
🛒 PEI Coated Spring Steel Sheet: http://geni.us/PrusaPEISheet
Pre configured Raspberri Pi Zero for the MK3: http://www.3dkc.net/mk3pi
Use code MAKERNOOB10 for 10% OFF any order over $20
Filaments used:
Aprintapro: http://geni.us/Aprintapro
Fillamentum: https://fillamentum.com/
Fiberlogy: http://fiberlogy.com/en/fiberlogy-filaments/filament-fiberflex-40d/
Howl's Moving Castle: http://geni.us/HowlsCastle
Printed things:
Howl's Moving Castel: https://www.myminifactory.com/object/3d-print-howl-s-moving-castle-55367
Vase: https://www.myminifactory.com/object/3d-print-simple-faceted-vase-23140
Make Test: https://www.thingiverse.com/thing:2071696
Paddel Boat: https://www.thingiverse.com/thing:2659257
water vase will be released once finalized.
Hand shapes were commissioned by a client so at the moment they are Private, trying to get permission to release them.
✌✌For the latest discounts codes on 3D Printers from gearbest, check out the following link (Constantly Updated): http://geni.us/3DMNOffers ✌✌
Matterhackers: http://geni.us/MH3DMN
Amazon International: http://geni.us/3DMNoob
Gearbest: http://geni.us/3DMNGB
Banggood: http://geni.us/3DMNBG
Aliexpress: http://geni.us/3DMNAE
Should you wish to support me, you can also do so via:
Patreon: https://www.patreon.com/3Dmakernoob
paypal: http://www.paypal.me/jcasha
Want to send me something? go ahead:
Attn: 3D Maker Noob Joe
P.O. Box 12
Constitution Street,
Mosta, MST 9059
Malta
Europe
Recording Equipment:
Equipment Used For Recording and Live Streams:
(A-Roll) Panasonic Lumix G7: http://geni.us/LumixG7
(B-Roll) Canon EOS760D: http://geni.us/CanonEOS
Canon Lens: http://geni.us/Canon2470
ElGato Stream Deck: http://geni.us/Streamdeck
Elgato HD60S Capture Card: http://geni.us/elgatohd60
Timelapse - GoPro Hero 5: http://geni.us/GoProH5
Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkit
Light Boxes: http://geni.us/StudioLights
High Speed SD Card: http://geni.us/SandiskSD
Видео Original Prusa I3 MK3 Review канала 3DMN
🛒 Prusa I3 MK3 Kit: http://geni.us/PrusaI3MK3Kit
🛒 Prusa I3 MK3 Assembled: http://geni.us/PrusaI3MK3Assembled
🛒 Prusa I3 MK2S Kit: http://geni.us/PrusaI3MK2S
🛒 PEI Coated Spring Steel Sheet: http://geni.us/PrusaPEISheet
Pre configured Raspberri Pi Zero for the MK3: http://www.3dkc.net/mk3pi
Use code MAKERNOOB10 for 10% OFF any order over $20
Filaments used:
Aprintapro: http://geni.us/Aprintapro
Fillamentum: https://fillamentum.com/
Fiberlogy: http://fiberlogy.com/en/fiberlogy-filaments/filament-fiberflex-40d/
Howl's Moving Castle: http://geni.us/HowlsCastle
Printed things:
Howl's Moving Castel: https://www.myminifactory.com/object/3d-print-howl-s-moving-castle-55367
Vase: https://www.myminifactory.com/object/3d-print-simple-faceted-vase-23140
Make Test: https://www.thingiverse.com/thing:2071696
Paddel Boat: https://www.thingiverse.com/thing:2659257
water vase will be released once finalized.
Hand shapes were commissioned by a client so at the moment they are Private, trying to get permission to release them.
✌✌For the latest discounts codes on 3D Printers from gearbest, check out the following link (Constantly Updated): http://geni.us/3DMNOffers ✌✌
Matterhackers: http://geni.us/MH3DMN
Amazon International: http://geni.us/3DMNoob
Gearbest: http://geni.us/3DMNGB
Banggood: http://geni.us/3DMNBG
Aliexpress: http://geni.us/3DMNAE
Should you wish to support me, you can also do so via:
Patreon: https://www.patreon.com/3Dmakernoob
paypal: http://www.paypal.me/jcasha
Want to send me something? go ahead:
Attn: 3D Maker Noob Joe
P.O. Box 12
Constitution Street,
Mosta, MST 9059
Malta
Europe
Recording Equipment:
Equipment Used For Recording and Live Streams:
(A-Roll) Panasonic Lumix G7: http://geni.us/LumixG7
(B-Roll) Canon EOS760D: http://geni.us/CanonEOS
Canon Lens: http://geni.us/Canon2470
ElGato Stream Deck: http://geni.us/Streamdeck
Elgato HD60S Capture Card: http://geni.us/elgatohd60
Timelapse - GoPro Hero 5: http://geni.us/GoProH5
Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkit
Light Boxes: http://geni.us/StudioLights
High Speed SD Card: http://geni.us/SandiskSD
Видео Original Prusa I3 MK3 Review канала 3DMN
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![The Road to 100,000 Original Prusa 3D printers](https://i.ytimg.com/vi/xX3pDDi9PeU/default.jpg)
![Original Prusa i3 MK3 Honest Review](https://i.ytimg.com/vi/CoYAWkJ7Y10/default.jpg)
![Revised: 3D Printing - 13 Things I Wish I Knew When I Got Started](https://i.ytimg.com/vi/LvGKfevdf_Q/default.jpg)
![Upgrading the MK3 with genuine HIWIN linear rails: Worth it?](https://i.ytimg.com/vi/J_RcgixLbAI/default.jpg)
![Guide to 3D Printing Filament! PLA ABS PETG TPU PEEK ULTEM](https://i.ytimg.com/vi/Or1FP43zx3I/default.jpg)
![The BEST 3D printing material? Comparing PLA, PETG & ASA (ABS) - feat. PRUSAMENT by Josef Prusa](https://i.ytimg.com/vi/ycGDR752fT0/default.jpg)
![Extruder motor visualizer](https://i.ytimg.com/vi/0ej0Fuaeexo/default.jpg)
![Original Prusa i3 mk3 3D Printer - Unboxing / 3D Printing / First Impressions](https://i.ytimg.com/vi/9p-rfK8LLUY/default.jpg)
![Prusa Multi Material Review(?) - My Thoughts on the Prusa MMU 3D Printer](https://i.ytimg.com/vi/MnOWX4Ujtv8/default.jpg)
![Awesome 3D Prints TimeLapse episode 5 (Prusa Mk3 Creality Ender 3 )](https://i.ytimg.com/vi/VFQeV8m9HQo/default.jpg)
![3D Printing TimeLapse episode 8 (Prusa Mk3 octolapse)](https://i.ytimg.com/vi/aubLuCFIejc/default.jpg)
![Original Prusa i3 Multi Material upgrade 2.0 - RELEASE!](https://i.ytimg.com/vi/0jc8xzotkdA/default.jpg)
![Satisfying 3D Prints TimeLapse episode 3 (Prusa I3 Mk3 Octolapse)](https://i.ytimg.com/vi/bgHoQ_5dT2M/default.jpg)
![Polymaker Polysher Review - 3D Printing with No Layer Lines using Polysmooth?](https://i.ytimg.com/vi/VdtFj-jK-ig/default.jpg)
![Prusa I3 MK2S Multimaterial Upgrade - Initial Thoughts](https://i.ytimg.com/vi/8bkLLtuP8eI/default.jpg)
![Original Prusa i3 MK3 3D Printer Review - Still the best 3D Printer?](https://i.ytimg.com/vi/a6elq83OVWQ/default.jpg)
![Satisfying 3d Printing episode 15 (creality ender 3 Prusa i3 mk3 octolapse)](https://i.ytimg.com/vi/8axtbHHRIks/default.jpg)
![Satisfying 3D Prints TimeLapse episode 9 (Prusa I3 Mk3 octolapse orbiting camera rig)](https://i.ytimg.com/vi/VRorEe1Ka5I/default.jpg)
![Second look at the Prusa i3 MK3: Sensory overload! #TCT2017](https://i.ytimg.com/vi/VzHbmHPPYX8/default.jpg)
![Prusa's new SL-1 & updates on the MK3S and Prusament! #MRRF2019](https://i.ytimg.com/vi/8b3Xez69Sj8/default.jpg)