Fortschritt e301 обзор масштабной модели
Ссылка для желающих помочь с развитием канала:https://www.donationalerts.com/r/pepsikolnik_
Все детали изготовлены на 3d принтере. На создание данной модели ушло 8 месяцев. Конструкция состоит из 632 деталей, масса 1,5 кг. Присутствует 3 раздельных источника питания (во избежание просадок напряжения из-за дымогенератора или включения ВОМ, т.к. вся электроника находящаяся в моделе была собрана "на коленке" из подручных средств. Аккумулятор на дымогенератор тоже собран из деталей найденных в ящике) и 2 электромотора. Для смазки коленвала в картер двигателя заливается машинное масло. Есть индикация заряда АКБ. Точно повторить привод подвижных составляющих жатки не получилось из-за цепно-ремëнных передачь, в таком масштабе изготовить цепь не получается, а замена на ремень обеспечивает сильное проскальзывание. Во избежание потери крутящего момента, передаваемого ВОМ, было принято решение заменить привод на более упрощëнный. Нагревательный элемент дымогенератора заправляется глицерином.
All parts are made on a 3d printer. The creation of this model took 8 months. The structure consists of 632 parts, weight 1.5 kg. There are 3 separate power sources (in order to avoid voltage drawdowns due to the smoke generator or the inclusion of the PTO, since all the electronics in the model were assembled "on the knee" from improvised means. The battery for the smoke generator is also assembled from the parts found in the box) and 2 electric motors. To lubricate the crankshaft, engine oil is poured into the engine crankcase. There is an indication of the battery charge. It was not possible to accurately repeat the drive of the moving components of the header due to chain-belt gears, it is not possible to make a chain on this scale, and replacing it with a belt provides strong slippage. In order to avoid the loss of torque transmitted by the PTO, it was decided to replace the drive with a more simplified one. The heating element of the smoke generator is filled with glycerin
Видео Fortschritt e301 обзор масштабной модели канала PePsIkOlNiK_217
Все детали изготовлены на 3d принтере. На создание данной модели ушло 8 месяцев. Конструкция состоит из 632 деталей, масса 1,5 кг. Присутствует 3 раздельных источника питания (во избежание просадок напряжения из-за дымогенератора или включения ВОМ, т.к. вся электроника находящаяся в моделе была собрана "на коленке" из подручных средств. Аккумулятор на дымогенератор тоже собран из деталей найденных в ящике) и 2 электромотора. Для смазки коленвала в картер двигателя заливается машинное масло. Есть индикация заряда АКБ. Точно повторить привод подвижных составляющих жатки не получилось из-за цепно-ремëнных передачь, в таком масштабе изготовить цепь не получается, а замена на ремень обеспечивает сильное проскальзывание. Во избежание потери крутящего момента, передаваемого ВОМ, было принято решение заменить привод на более упрощëнный. Нагревательный элемент дымогенератора заправляется глицерином.
All parts are made on a 3d printer. The creation of this model took 8 months. The structure consists of 632 parts, weight 1.5 kg. There are 3 separate power sources (in order to avoid voltage drawdowns due to the smoke generator or the inclusion of the PTO, since all the electronics in the model were assembled "on the knee" from improvised means. The battery for the smoke generator is also assembled from the parts found in the box) and 2 electric motors. To lubricate the crankshaft, engine oil is poured into the engine crankcase. There is an indication of the battery charge. It was not possible to accurately repeat the drive of the moving components of the header due to chain-belt gears, it is not possible to make a chain on this scale, and replacing it with a belt provides strong slippage. In order to avoid the loss of torque transmitted by the PTO, it was decided to replace the drive with a more simplified one. The heating element of the smoke generator is filled with glycerin
Видео Fortschritt e301 обзор масштабной модели канала PePsIkOlNiK_217
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![МТЗ-80 VS ДТ-75 Combat Crew сравнение проходимости](https://i.ytimg.com/vi/uBM-cyQ0VpI/default.jpg)
![Обновленный МТЗ-80 с плугом ПЛН-3-35 RC модель](https://i.ytimg.com/vi/NF7BxBK0Foo/default.jpg)
![МТЗ-80 с плугом ПЛН-3-35](https://i.ytimg.com/vi/L7JSI-ELrwY/default.jpg)
![Fortschritt E301 первый запуск в этом году](https://i.ytimg.com/vi/jtN-ZNm2yas/default.jpg)
![ДТ-75 #combatcrew](https://i.ytimg.com/vi/RbCPBibcSZY/default.jpg)
![ДТ-75 #combatcrew](https://i.ytimg.com/vi/29t0YnLK6EQ/default.jpg)
![ДТ-75 #combatcrew](https://i.ytimg.com/vi/FWF2H4cls2A/default.jpg)
![ДТ-75](https://i.ytimg.com/vi/EyInnqQOaqI/default.jpg)
![ДТ-75 проверка отвала](https://i.ytimg.com/vi/64l-QKTAPXU/default.jpg)
![ДТ-75 проверка перед отправкой](https://i.ytimg.com/vi/lIgoI6C5DiU/default.jpg)
![ДТ-75 RC обзор серийной модели на продажу](https://i.ytimg.com/vi/bltXD6eQCHc/default.jpg)
![ДТ-75 первая серийная модель](https://i.ytimg.com/vi/Hw5xODBaUt4/default.jpg)
![ДТ-75 первая экспортная модель](https://i.ytimg.com/vi/KUzA638VTy0/default.jpg)
![дт-75 в глубоком снегу #дт75 #combatcrew](https://i.ytimg.com/vi/dKMIXXSVWwk/default.jpg)
![ДТ-75 в глубоком снегу #combatcrew](https://i.ytimg.com/vi/BSb9y279mdE/default.jpg)
![ДТ-75 с канала #combatcrew](https://i.ytimg.com/vi/QH21FboAXxc/default.jpg)
![Первое появление ЗиЛ-157 с канала #combatcrew](https://i.ytimg.com/vi/QgLr_d2axRQ/default.jpg)
![Испытания в снегу масштабной модели трактора ДТ-75 с японским мотором V8 с канала @combatcrew](https://i.ytimg.com/vi/8h9V6sQTH5Q/default.jpg)
![Буксировка МТЗ-82 трактором ДТ-75 с канала #combatcrew](https://i.ytimg.com/vi/UVJ_DJj8HP0/default.jpg)
![ЗиЛ-157 тизер нового проекта #combatcrew #зил157](https://i.ytimg.com/vi/p2uufaauQc8/default.jpg)
![ДТ-75 с японским v8 #combatcrew](https://i.ytimg.com/vi/2ScpJyXtdp4/default.jpg)