2007 - 2012 SantaFe Touch Screen Stereo Install

Watch a full tutorial as a 2008 Santa Fe (with JBL Amplified System) will have a brand new Pioneer Bluetooth radio installed AVH-2300NEX. This radio install adds Bluetooth functionality, Apple Carplay, Android Auto, and enhanced power output for better sound quality.

This video applies to Santa Fe models for years 2007, 2008, 2009, 2010, 2011, and 2012. This video also includes dash trim and stereo removal, radio wiring, programming, and installation.

Click here to see the backup Camera install video:
https://youtu.be/VrG-jOhDn-M

If you have Rear Seat Entertainment Flip down screen installed (RSE), The audio signals from the RSE can be found at the main radio plug. There are 3 wires on the plug with the rear speaker wires. The colors are consistent on 2 of these vehicles so far. They are black (shield), brown (right), and white (left). Just splice a pair of RCAs to these and plug to your aux port. The only preliminary thing I've found is that you need to have the stock deck turned on and set the volume level up to the RSE BEFORE you remove the stock deck otherwise you will not get any signals at the plug. Also, you will lose the volume control on the rear.

If you have any questions, leave a comment below! Be sure to like and subscribe!

Parts Used:
*Metra 95-7325S Double DIN Kit
*Metra 70-7302 Radio Wiring Harness
*PAC SWI-RC Steering Wheel Control Interface
*Pioneer AVH-2300NEX
*Microbypass
*Remii AUX / USB Flush Mount Relocation Kit
*Rockford Fosgate RFI2SW RCA to speaker wire adapter (for Rear Seat Entertainment)
*eRapta ERT01 Reverse Camera (presented in a separate video)

Видео 2007 - 2012 SantaFe Touch Screen Stereo Install канала Provo Beast Audio Installation