Speeduino Launch Control Guide | How To Set Up Launch Control For Flames, 2-Step or Hard Launches!

Want to enable launch control or two step on your car with a Speeduino ECU? Here's how! This guide will show you how to enable launch control, as well as explain each setting and what it does. The process to setting up 2-step on a Speeduino ECU is very straight forward. You first enable launch control, retard your ignition timing and set a hard and soft limit. You will need to have an input for your clutch position for this to work. You also can set your ECU to a rolling rev limit which will be better for keeping your turbo spooled up. Note that launch control is hard on your car's engine and turbo, so keep this in mind. YOU are responsible for your own car and tuning, this video just shows you what these settings are capable of. My car is a Turbo'd 1993 Mazda MX-5 Miata running on a SpeedyEFI ECU.

Support CashedOutCars on Patreon, and get exclusive benefits!
https://www.patreon.com/CashedOutCars

For write ups, tech articles, and more, check out my website!
https://www.cashedoutcars.com

End Screen Music: 3mbrace - Issues https://spoti.fi/3hpG1b0

*All links are affiliate links, purchasing through them means a small portion of the total cost goes towards supporting the channel, and there's NO additional cost to you!

Видео Speeduino Launch Control Guide | How To Set Up Launch Control For Flames, 2-Step or Hard Launches! канала CashedOutCars