How to set up and use your Kokido Telsa EV15 Rechargeable pool vacuum

Getting started: How to set up, use, recharge and clean your new Kokido Telsa EV15 rechargeable pool vacuum.

The colorway of your particular cleaner may vary from the one shown in the video, but the process for using it will be the same. The parts included with your Telsa EV15 cleaner will vary depending on the model you own.

1. Attach the pole connector and vacuum head (Make sure filter bag is installed).
2. Plug in charger adaptor to the electricity socket.
3. Connect the charger base to the product, the light on the adaptor will turn red.
4. Fully charge the cleaner prior to first use (4-6 hours).
5. Remove the charger from the cleaner when it shows green light. Cover the charger port protective cap.
6. Connect the section poles provided or connect to a standard telescopic pole (not included) for a larger pool reach.
7. Switch on the cleaner by turning the magnetic switch.
8. Attach flat brush to reach and clean any corners or narrow space.
9. After cleaning your pool, empty the debris compartment and clean the filter bag.
10. Simply clean the filter bag with garden hose jet sprayer or from water tap. 11. To recharge, make sure the charging port on the cleaner is dry and recharge it for your next use.

IMPORTANT: Charging base is not waterproof, do not put it in water.
Make sure filter bag is installed before using the cleaner. Failure to do so may result in damaging the impeller.

Видео How to set up and use your Kokido Telsa EV15 Rechargeable pool vacuum канала Kokido Pool Product Innovations