Orange Pi 3 First Look And Android Test - New Single Board Computer 2019

Yes this was reuploaded due to the fact I used KODI for 4k Video Playback and the performance is not great so I switched out to the built-in video player and it works so much better.

In this video, I take a look at the all-new Orange Pi 3 Single board computer powered by an Allwinner H6 @ 1.8Ghz! IS it any good? Let's FInd Out.

Follow Me On Twitter: https://twitter.com/theetaprime
Follow Me On Instagram: https://www.instagram.com/etaprime/

Equipment I Use:
Screen Capture Device: https://amzn.to/2STpX4C
Tool Kit: https://amzn.to/2M6l9WS
Soldering Station: https://amzn.to/2FtdVeu
Camera: https://amzn.to/2M6KFLB
Tripod: https://amzn.to/2CmdYVY
Raspberry Pi 3 B Plus: https://amzn.to/2DTF0Db
Flirc Case: https://amzn.to/2OBQTXz

Specs:
Processor — Allwinner H6 (4x Cortex-A53); ARM Mali-T720 MP2 GPU with OpenGL ES3 and DirectX 11
Memory — 1GB or 2GB LPDDR3 RAM
Storage — microSD slot; optional 8GB eMMC
Wireless – Ampak AP6256 module with 802.11a/b/g/n/ac and Bluetooth 5.0; antenna
Networking — 10/100/1000Mbit Ethernet port
Media I/O:
HDMI 2.0a with audio and HDCP 2.2 output
3.5mm audio output jack with CVBS AV
Mic input
Other I/O:
4x USB 3.0 ports
USB 2.0 host port
Micro-USB 2.0 OTG port with power
3-pin GPIO with UART and ground
26-pin GPIO expansion connector
Other features — IR receiver; power and status LEDs
Power — DC barrel jack with +5V @ 2A; supports micro-USB power; PMU (AXP805); power button;
Weight — 75 g
Dimensions — 90 × 64mm
Supported OSes — Android 7.0; Ubuntu and Debian images coming (experimental Linux 4.19 available from Armbian

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!

THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY!

#orangepi #SBC #ETAPRIME

Видео Orange Pi 3 First Look And Android Test - New Single Board Computer 2019 канала ETA PRIME