SELF BLEED CLUTCH LINE & Change Slave Cylinder | Honda & Acura

1992-2000 Honda/Acura self bleed clutch line and change slave cylinder EASY!

Tools needed:

1. DOT 3 Brake Fluid
2. 10mm/12mm flare nut wrench
3. 12mm socket
4. socket wrench
5. 3/8" or 1/4" (most likely) plastic tube
6. clear bottle

Bench Bleed Video: https://www.youtube.com/watch?v=3hvaYNM3TVQ

Disclaimer:
Due to factors beyond the control of Engineered Mojo, I cannot guarantee against improper use or unauthorized modifications of this information. Engineered Mojo assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Engineered Mojo recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Engineered Mojo, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Engineered Mojo.

Видео SELF BLEED CLUTCH LINE & Change Slave Cylinder | Honda & Acura канала Engineered Mojo