Old Machinists Mill Trick To Quickly Find a Rod Centerline
DIY wet blaster plans and other plans. http://arnoldsdesign.com/Digital-Plans-and-ebooks.html
How to convert a sand blast cabinet into a vapor vapor blaster (wet blaster). On sale until the end of September.
Click on links to check current pricing.
Indicol indicator holder: https://amzn.to/3b90qOJ
Starrett 6" Flexible Steel Rule: https://amzn.to/2I3uMm2
Brown & Sharpe 599-792-2 Edge Finder Single, 3/8 Shank x 0.200" Head Diameter https://amzn.to/2GMM1al
Note:
There are many ways to find a center line, and I'm familiar with probably most of them. I own several edge finders, along with many other location devices, that I have used probably more than a thousand times in my 28 years of machining. What I show in the video is by no means the go-to method of finding a center, nor do I express that in the video. It is only meant to give you a quick approximation of center.
I show you a technique to quickly find the center line of a piece of round stock in the mill. This was shown to me by an old time machinist many years ago, and it has been a tool I've been using ever since. Of course there are other ways to find center of round stock. I'm familiar with the other methods as well. This is just one of many.
As an Amazon Associate I earn from qualifying purchases.
Видео Old Machinists Mill Trick To Quickly Find a Rod Centerline канала Arnold's Design
How to convert a sand blast cabinet into a vapor vapor blaster (wet blaster). On sale until the end of September.
Click on links to check current pricing.
Indicol indicator holder: https://amzn.to/3b90qOJ
Starrett 6" Flexible Steel Rule: https://amzn.to/2I3uMm2
Brown & Sharpe 599-792-2 Edge Finder Single, 3/8 Shank x 0.200" Head Diameter https://amzn.to/2GMM1al
Note:
There are many ways to find a center line, and I'm familiar with probably most of them. I own several edge finders, along with many other location devices, that I have used probably more than a thousand times in my 28 years of machining. What I show in the video is by no means the go-to method of finding a center, nor do I express that in the video. It is only meant to give you a quick approximation of center.
I show you a technique to quickly find the center line of a piece of round stock in the mill. This was shown to me by an old time machinist many years ago, and it has been a tool I've been using ever since. Of course there are other ways to find center of round stock. I'm familiar with the other methods as well. This is just one of many.
As an Amazon Associate I earn from qualifying purchases.
Видео Old Machinists Mill Trick To Quickly Find a Rod Centerline канала Arnold's Design
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to cut a RadiusGet your parts to run true in a non adjustable chuck. YOU MUST WATCH THIS!Machine Drill a Square Hole in Round Stock 705 tubalcainRollation 3 - Square to RoundFind the Center of a Circle (3 EASY and QUICK Ways)Using the WigglerWhich Drill Bit Sharpener is Best? Let's find out! Chicago Electric, Drill Doctor, Bosch, GoodsmannHow to remove a broken bolt in a deep hole | remove broken bolt in recessed holeSimplest Way to Drill in the Center of ANY Rod!You will throw your die handles away after you watch this !!!old machinist trickTapping Essentials - Every Machinist Needs to Watch This - Haas Automation Tip of the DaySHOP TIPS // How to // Aligning drilled holes in round materialsExtract Broken bolts from deep hole NEW easy WAYI Bet You Didn't Know You Could Do This With a LatheHow To Cut Threads On A LatheEdge Finding Round Stock without a Digital ReadoutMaking super accurate angle cuts on the mill - GREAT TRICK !!How to drill through the centre of a bolt | drill bolt guideThe Best Mill Tip You Will Ever Get --WATCH THIS ENTIRE VIDEO--