VLAN Trunk Links | Network Fundamentals Part 13
Switch Trunk Links | Network Fundamentals Part 13
We’ve seen that VLANs can divide up a switch into separate logical networks. But what happens when we run out of ports? We need to buy a new switch.
But how do we connect the two switches in a VLAN-aware network? Do we need a separate link for each VLAN? That could work, but won’t scale well. What if we have 50 VLANs?
Instead, we can use a trunk link. This uses a process called tagging, where the VLAN ID is added to each frame, in the form of a small tag in the ethernet header.
Now a single link can be used between the switches, and traffic from different VLANs can pass over it, all while still keeping the traffic separate.
There are a few special VLANs which work with this. One of these is VLAN 1, which is used for switch-to-switch control traffic (for example, CDP or LLDP). Another is the native VLAN, which enables non-VLAN aware devices to connect.
Trunking also enables extra features, like Router On A Stick, or ROAS. This is where a router can connect to the network using a single trunk link, and forward traffic between VLANs.
See how all of this works in this video!
Lab: https://networkdirection.net/labsandquizzes/labs/lab-vlan-trunking-and-tagging/
Quiz: link: https://networkdirection.net/labsandquizzes/quizzes/vlan-trunking-and-tagging-quiz/
Patreon information: https://networkdirection.net/patreon/
CCENT/CCNA ICND1 100-105 Official Cert Guide (affiliate):
https://click.linksynergy.com/link?id=RL4E*8CmbSY&offerid=145238.2955226&type=2&murl=http%3A%2F%2Fwww.ciscopress.com%2Ftitle%2F9780135792735
In the next video, we’re investigating using a router to provide security using access-lists
Overview of this video:
0:00 Introduction
0:33 Extending VLANs Across Switches
1:38 How Trunking Works
6:12 Voice VLANs
7:49 Lab (Part 1)
14:14 Quiz #1
14:25 VLAN 1
15:36 Native VLAN
16:30 Lab (Part 2)
21:39 Quiz #2
23:51 ROAS and Lab (Part 3)
LET'S CONNECT
🌏 https://www.youtube.com/c/networkdirection
🌏 https://twitter.com/NetwrkDirection
🌏 https://www.patreon.com/NetworkDirection
🌏 https://www.networkdirection.net
#NetworkDirection
Видео VLAN Trunk Links | Network Fundamentals Part 13 канала Network Direction
We’ve seen that VLANs can divide up a switch into separate logical networks. But what happens when we run out of ports? We need to buy a new switch.
But how do we connect the two switches in a VLAN-aware network? Do we need a separate link for each VLAN? That could work, but won’t scale well. What if we have 50 VLANs?
Instead, we can use a trunk link. This uses a process called tagging, where the VLAN ID is added to each frame, in the form of a small tag in the ethernet header.
Now a single link can be used between the switches, and traffic from different VLANs can pass over it, all while still keeping the traffic separate.
There are a few special VLANs which work with this. One of these is VLAN 1, which is used for switch-to-switch control traffic (for example, CDP or LLDP). Another is the native VLAN, which enables non-VLAN aware devices to connect.
Trunking also enables extra features, like Router On A Stick, or ROAS. This is where a router can connect to the network using a single trunk link, and forward traffic between VLANs.
See how all of this works in this video!
Lab: https://networkdirection.net/labsandquizzes/labs/lab-vlan-trunking-and-tagging/
Quiz: link: https://networkdirection.net/labsandquizzes/quizzes/vlan-trunking-and-tagging-quiz/
Patreon information: https://networkdirection.net/patreon/
CCENT/CCNA ICND1 100-105 Official Cert Guide (affiliate):
https://click.linksynergy.com/link?id=RL4E*8CmbSY&offerid=145238.2955226&type=2&murl=http%3A%2F%2Fwww.ciscopress.com%2Ftitle%2F9780135792735
In the next video, we’re investigating using a router to provide security using access-lists
Overview of this video:
0:00 Introduction
0:33 Extending VLANs Across Switches
1:38 How Trunking Works
6:12 Voice VLANs
7:49 Lab (Part 1)
14:14 Quiz #1
14:25 VLAN 1
15:36 Native VLAN
16:30 Lab (Part 2)
21:39 Quiz #2
23:51 ROAS and Lab (Part 3)
LET'S CONNECT
🌏 https://www.youtube.com/c/networkdirection
🌏 https://twitter.com/NetwrkDirection
🌏 https://www.patreon.com/NetworkDirection
🌏 https://www.networkdirection.net
#NetworkDirection
Видео VLAN Trunk Links | Network Fundamentals Part 13 канала Network Direction
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Cisco CCNA - Spanning Tree Vs Rapid Spanning TreeEncryption Basics | CryptographyCisco CCNA - What is EtherChannel?Quality Of Service Application Traffic ExplainedCisco CCNA - How IP Addresses WorkHow To Configure OSPF CostMastering RSTP: Unveiling the Secrets of BPDU's and the Root BridgeRemote Sites - How To Design Your Own Enterprise Network (Part 3)Cisco CCNP - What Are The Main Components Of CEF? (Cisco Express Forwarding)Cisco Ccna: Learn Spanning Tree Port States In 5 Mins!Routing Instances | Introduction to Juniper and JNCIA Part 19EIGRP Route Goes Active - How? Why? What Happens Next?OSPF in Junos | Introduction to Juniper and JNCIA Part 17IT Certification Study Tips YOU NEED TO KNOW #5Cisco Ccna - Vlans: How To Keep Your Network Traffic In CheckEIGRP - Active & Passive Routes Explained (In Under 2 Minutes!)Configuration Groups | Introduction to Juniper and JNCIA Part 7Cisco CCNP - How Does CEF Load Balancing Work? (Cisco Express Forwarding)Cisco CCNA - Spanning Tree Port States and TimingUnderstanding IPv6 Addresses | Free CCNA Training CourseOSPF (Part 3) | Free CCNA Training | Become Cisco Certified 2022