Taller mecánico
http://www.carloskretz.com
_______________________
Taller mecánico
Era habitual utilizar un único motor a vapor para accionar todas las máquinas de una fábrica, ya que no era práctico pensar en instalar motores individuales. Un entramado aéreo de ejes, poleas y correas accionaba cada una, la que se ponía en marcha o detenía mediante un embrague. El modelo intenta recrear el aspecto de un taller mecánico, tal como podía lucir a fines del siglo diecinueve, y buena parte del siguiente.
En él se incluyen un torno, una fresadora, una limadora, una perforadora y una amoladora (*). Cada una de ellas, así como los componentes de la transmisión aérea, es una réplica de las ofrecidas en un catálogo industrial publicado por la firma Chas Strelinger & Co en 1895, en el que se incluyen grabados y especificaciones.
El catálogo también ofrecía diferentes tipos de calderas y motores a vapor. En el modelo se ha reemplazado el motor a vapor por uno eléctrico (oculto), con velocidad ajustable a voluntad mediante un control ubicado en la parte posterior, junto con los interruptores de las luces de taller y oficina.
(*) Partes de fundición suministradas por P.M.Research.
_______________________
Mechanical Workshop
Since it was impractical to use one engine for each machine, the steam engine was usually applied to power factories using a single engine and an aerial network of shafts, pulleys and belts to reach each machine, which could be started or stopped using a clutch.
The model attempts to recreate a mechanical workshop as it looked in the late nineteenth century and well into the next.
It includes a lathe, a milling machine, a shaper, a drill and a grinder (*). Each of them, including the parts of the aereal transmision, is a réplica of those that appeared in the drawings, prints and specifications of a 1895 industrial catalog published by Chas and Strelinger & Co, a Detroit company. The catalog also offered boilers and steam engines.
In the model, the movement is produced by a hidden electric engine, and the speed can be adjusted from a control located at the back, along with the workshop and office light switches.
(*) Castings supplied by P.M.Research.
_______________________
Видео Taller mecánico канала Carlos Kretz
_______________________
Taller mecánico
Era habitual utilizar un único motor a vapor para accionar todas las máquinas de una fábrica, ya que no era práctico pensar en instalar motores individuales. Un entramado aéreo de ejes, poleas y correas accionaba cada una, la que se ponía en marcha o detenía mediante un embrague. El modelo intenta recrear el aspecto de un taller mecánico, tal como podía lucir a fines del siglo diecinueve, y buena parte del siguiente.
En él se incluyen un torno, una fresadora, una limadora, una perforadora y una amoladora (*). Cada una de ellas, así como los componentes de la transmisión aérea, es una réplica de las ofrecidas en un catálogo industrial publicado por la firma Chas Strelinger & Co en 1895, en el que se incluyen grabados y especificaciones.
El catálogo también ofrecía diferentes tipos de calderas y motores a vapor. En el modelo se ha reemplazado el motor a vapor por uno eléctrico (oculto), con velocidad ajustable a voluntad mediante un control ubicado en la parte posterior, junto con los interruptores de las luces de taller y oficina.
(*) Partes de fundición suministradas por P.M.Research.
_______________________
Mechanical Workshop
Since it was impractical to use one engine for each machine, the steam engine was usually applied to power factories using a single engine and an aerial network of shafts, pulleys and belts to reach each machine, which could be started or stopped using a clutch.
The model attempts to recreate a mechanical workshop as it looked in the late nineteenth century and well into the next.
It includes a lathe, a milling machine, a shaper, a drill and a grinder (*). Each of them, including the parts of the aereal transmision, is a réplica of those that appeared in the drawings, prints and specifications of a 1895 industrial catalog published by Chas and Strelinger & Co, a Detroit company. The catalog also offered boilers and steam engines.
In the model, the movement is produced by a hidden electric engine, and the speed can be adjusted from a control located at the back, along with the workshop and office light switches.
(*) Castings supplied by P.M.Research.
_______________________
Видео Taller mecánico канала Carlos Kretz
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Construcción de un motor W-18.Parte 1(Costruction of a W-18 Engine.Part 1)](https://i.ytimg.com/vi/sdm7gc4_Oww/default.jpg)
![45018865.mp4](https://i.ytimg.com/vi/qc266umXVtQ/default.jpg)
![Antique Jewelry Lathe [Restoration]](https://i.ytimg.com/vi/3PRjw2rohxU/default.jpg)
![PM Research Model Shaper - Joe Higgins](https://i.ytimg.com/vi/SyW0lBeSBYs/default.jpg)
![Transmisió manual, ¿cómo funciona?](https://i.ytimg.com/vi/bDM2Y0SrUUM/default.jpg)
![Making wooden sunglasses | Деревянные очки своими руками.](https://i.ytimg.com/vi/cithERrdpI0/default.jpg)
![¿Cómo controlar la velocidad de giro de un motor eléctrico? - SIGMA IMECSA](https://i.ytimg.com/vi/AD--ZA2QEBw/default.jpg)
![6 AMAZING ideas [6 ideas increíbles para tu taller]](https://i.ytimg.com/vi/wOWQg5witMA/default.jpg)
![PM Research Model Drill Press](https://i.ytimg.com/vi/7GKpjqPeZsc/default.jpg)
![Fabricando flange para placa de torno](https://i.ytimg.com/vi/Sh_onyAdGMs/default.jpg)
![Homemade Lathe steady rest (for a 100+ years old lathe) (using only a lathe)](https://i.ytimg.com/vi/-dvrazG97hU/default.jpg)
![Is This The World's Smallest 4 Jaw Chuck ?? - Miniature Engine Lathe - #3 (a)](https://i.ytimg.com/vi/KtlXg-iU2XI/default.jpg)
![Fabriqué esta pieza y NUNCA sabrás que esconde en su interior](https://i.ytimg.com/vi/48f2CIvFyhA/default.jpg)
![Proceso de Fundición](https://i.ytimg.com/vi/GNTfC1dgAag/default.jpg)
![DIY - Nuevos banco para el taller](https://i.ytimg.com/vi/h0VVP9POxRM/default.jpg)
![TORNO CASERO para MADERA -MI VERSION- (PARTE 1 DE 2)](https://i.ytimg.com/vi/TQr-PzmM95Q/default.jpg)
![Sebastain Headstock Gears](https://i.ytimg.com/vi/3FMpA4F4cgM/default.jpg)
![South Bend 9A Restoration Nearly Complete](https://i.ytimg.com/vi/bRkcMH0GBHc/default.jpg)
![Torno de Bancada Sanches Blanes modelo A ano 1986](https://i.ytimg.com/vi/sd94_Dk1VpA/default.jpg)
![Como hice un TABLERO ELECTRICO para mi taller de aficionado](https://i.ytimg.com/vi/TfWwe0oqrzQ/default.jpg)