Early days development of a LoRa dog tracker

Parts List for Tracker :
^^^^^^^^^^^^^^^^^^^^^^^
- RFM95 Lora Module (915Mhz if you are in North America) Make sure it is surface mount if you are using the PCB board.
- Arduino Pro Mini (8 Mhz, 3.3V)
- Beitian BN-180 GPS module
- PCB Board : https://diycon.nl/product/lora-node-pcb-203-interface-pro-mini-rfm92-95/
- Spring antenna tuned for 915Mhz (you can just use a wire as well)
- 3.7V LiPo Battery
- TP4056 LiPo battery Charger module
- A switch.

Parts for the "Gateway"
^^^^^^^^^^^^^^^^^^^^^^^^
- RFM95 Lora Module (915Mhz if you are in North America) Make sure it is surface mount if you are using the PCB board.
- ESP32 Microcontroller
- Power : 3.7V 18650 Battery works good here or just plug it into a charger
PART 2 in this saga can be found here :
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
https://youtu.be/psN0zVSkr4k
LoRa to ESP32 Tutorial
^^^^^^^^^^^^^^^^^^^^^^^^
https://randomnerdtutorials.com/esp32-lora-rfm95-transceiver-arduino-ide/

LoRa to Arduino Pro Mini Tutorial
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
https://www.thethingsnetwork.org/labs/story/build-the-cheapest-possible-node-yourself

Видео Early days development of a LoRa dog tracker канала DorkEnergy