How to make a cigar box guitar

In this video I will show you my version on how to build a cigar box guitar with a pick up.

To get a free print out of measurements and directions go to this link and scroll down.
https://www.darstellabotta.com/cbgs

Materials and tools:

32 inch 1x2 red oak
tuning pegs 2 right/1 left
3 string set GDG (out of a regular pack of guitar strings it would be the A, D and E strings or gauges .042, .030 and .009 or close to those decimals.)
1 Piezo disc pick up
a guitar strap button w/ screw
sand paper or sanding block
phillips head screw driver
rubber mallet (optional)
pliers
wire cutters
pencil, eraser and sharpie
tape measure and ruler
one eye bolt
one 2inch hex bolt
3 pan head screws
T square
17/32 socket (optional)
2 wood clamps
saw
hammer
flat head screw driver
drill
drill bits 1/4, 5/8, 3/8, 5/16, 1/8, 5/64 (you might want to get a set)
hot glue gun w/glue sticks

You can get most of the materials from this website https://www.cbgitty.com

My music is at http://www.darstellabotta.com

Any questions please post below. Thanks:)

Download my music for free here 💎 https://darstellabotta.bandcamp.com

If you would like to support me as a artist you can purchase my records, Ts, CDs, stickers or a cigar box guitars off of my etsy site here https://www.etsy.com/shop/DarStellabottaShop or donate thru Paypal by clicking this link and entering any amount https://www.paypal.me/DarStellabotta every little bit helps, thanks so much.

Please subscribe to my youtube channel and follow me on my social media!

Thanks so much!

Видео How to make a cigar box guitar канала Dar Stellabotta