HVAC ECM Variable Speed Blower Motor Troubleshooting! Simple Testing!

In this HVACR Video, we go over the Troubleshooting of the ECM 3.0 Variable Speed Blower Motor and Testing with and without the TecMate Pro. I show you where the test voltage goes and how to check if the Fan Motor is good or bad. I have other variable speed motor diagnosis videos on determining if the actual motor is bad or the module on the side of the motor is bad. PLxnHR5_D2ojyDrxCT9MIttGW4wxOZ3n

Refrigerants, Fuel Gases, Electricity, and other hazards are present when working on HVACR systems. It is solely up to the technician viewing this to determine if he/she has the proper safety training and experience needed to work on HVACR systems and components examined in this video.
Don't try this at home.
Supervision is needed by a licensed HVAC Tech while doing this as Experience and Apprenticeship garners Wisdom and Safety.

If you want to support the ACSERVICETECH Channel and receive more HVAC content, check out www.Patreon.com/acservicetech

These Videos are all part of our Training Series on HVACR Service, Installation, Preventative Maintenance, General Knowledge, and Tips. Please comment and ask for videos that you would like to see in the future! We come out with new videos every few days from my job sites, service calls, and the training shop! I hope you enjoy and find them very beneficial! See you next time at ACSERVICETECH Channel!

Check out All of the ACSERVICETECH Playlists- https://www.youtube.com/channel/UCOZR-1IqsAer9wzlvFgb4mA/playlists?view_as=public

ACSERVICETECH is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
You can enter Amazon through this http://amzn.to/2aenwTq
Here is the Link for the TecMate Pro- http://amzn.to/2jIP0ty

Here is the Link for the newer UEI DL469 Multimeter- http://amzn.to/2jw4ePJ

Here is a link for the Supco Magnet Jumpers http://amzn.to/2gS4h6z

Here is the Link for the newer UEI DL479 Multimeter with temp sensor- http://amzn.to/2jtsUbJ

Here is the link to the 2 pairs of alligator clips- http://amzn.to/2CtIL5z

Here is a link to the JB 6 CFM Vacuum Pump http://amzn.to/2nqbvo8

Here is the Link to the Appion Blue 3/8" to 1/4" Vacuum Hose- http://amzn.to/2uYlVyc

Here is the Link to the Appion Red 3/8" to 1/4" Vacuum Hose- http://amzn.to/2uYg6Ro

Here is the link to the Appion Valve Core Removal Tool- http://amzn.to/2uYr8WL

Here is the link to the Yellow Jacket 1/4" by 1/4" heavy duty hose straight- http://amzn.to/2umtcod

Here is the link to the CPS Vacuum Micron Gauge- http://amzn.to/2v1nM3O

Here is the link to the Supco Vacuum Micron Gauge- http://amzn.to/2v1JRiA

Here is a link for RectorSeal Bubble Gas Leak Detector http://amzn.to/2ckWACn

Here is a link to the UEI DL389 Multimeter used in the videos- http://amzn.to/2xAdaJf

Here is the link to the Fieldpiece ST4 Dual Temp Meter- http://amzn.to/2wc1ME3

Here is a link to the Air Acetylene Torch setup- http://amzn.to/2aQalsb

Here is a link to the 15% Silver Brazing Rods- http://amzn.to/2gVLyLc

Here is a link the Nitrogen Regulator http://amzn.to/2bXdR5f

Here is a link to the Nitrogen Flow Meter http://amzn.to/2brvoBg

Here is a link to the Digital Refrigerant Scale used in the video
http://amzn.to/2b9oXYl

Here is the Link for the Yellow Jacket Refrigerant Manifold Gauge Set used in the videos http://amzn.to/2aenwTq

Here is a link to Refrigerant hoses with valves used in the videos http://amzn.to/2aBumVI

Here is the link for the Imperial Kwik Charge 535-C- http://amzn.to/2uipEI6

Here is the link to the Fieldpiece SDMN6 Dual Pressure Testing Manometer with Pump-http://amzn.to/2jyK5Ka

Here is a link for the Supco Magnet Jumpers http://amzn.to/2gS4h6z

Here is a link to 1 gallon of JB Vacuum Pump Oil http://amzn.to/2mGrlXy

Here is a link to the General Tools digital Psychrometer
http://amzn.to/2cSHsi1

Here is a link to the Fieldpiece SDP2 Digital Psychrometer- http://amzn.to/2nniMVR

Here is the link for the Ratcheting Service Wrench http://amzn.to/2dGV4Nh

Here is a link to the Appion G5 Twin Recovery Pump http://amzn.to/2dGSEyr

Here is a link to the Malco Sheet metal scribe- http://amzn.to/2qCwu9D

Here is a link to the Malco 90 Degree Right Hand Vertical Snips- http://amzn.to/2qHHpu4

Here is a link to the Malco 90 Degree Left Hand Vertical Snips- http://amzn.to/2qHF564

Here is the link for the Malco 3" Blade Combination Snips- http://amzn.to/2dz7Ejc

Here is the link for the Irwin Wire Stripper/Cutter/Crimper http://amzn.to/2dGTj2V
Thank You,
ACSERVICETECH

Видео HVAC ECM Variable Speed Blower Motor Troubleshooting! Simple Testing! канала AC Service Tech LLC