5.9L Magnum V8 Comp Cams Camshaft INSTALL | PART 2
In this video we are installing the comp cams camshaft in the 5.9L 360 Magnum V8 Dodge Dakota R/T Pickup Truck to give it more performance and power. This high lift cam will open up the engine and bring more air in and out of the engine resulting in more hp sauce. We take you along for our install which is the first time doing this on a pushrod v8 engine so we are documenting our installation of the cam with you guys!
Here is the best RTV gasket maker you can buy that we used!
https://amzn.to/3crhy1e
Here is the gasket set for the timing cover we used
https://amzn.to/3cABizn
Here are the intake manifold gaskets I like using
https://amzn.to/2BzIYFD
Here is the special tool to hold the crank you saw us using
https://amzn.to/2XyBB9X
Here is the comp cams degree wheel that is specific for the crank holding tool https://amzn.to/36YeR6d
Here is the JEGS Degree complete kit that we used
https://amzn.to/3eOUGud
Support BoostedMotorsports by JOINING Today! https://www.youtube.com/channel/UC3B_Q1mNw1iuS8KkAZi_fUA/join
**Checkout other cool products Boosted Motorsports has tested and recommends HERE** 👇
https://www.amazon.com/shop/boostedmotorsports
👇 **SEND STUFF TO THE BOOSTEDMOTORSPORTS P.O. BOX** 👇
PO BOX 1873
San Jacinto, CA 92581
or
315 E Esplanade Ave
#1873
San Jacinto, CA 92583
For transmission parts check out WIT
Contact Clint (937) 262-7452
Mention Boosted Motorsports and save 20%
https://www.wittrans.com/
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#Dodge #Mopar #Trucks
Видео 5.9L Magnum V8 Comp Cams Camshaft INSTALL | PART 2 канала BoostedMotorsports
Here is the best RTV gasket maker you can buy that we used!
https://amzn.to/3crhy1e
Here is the gasket set for the timing cover we used
https://amzn.to/3cABizn
Here are the intake manifold gaskets I like using
https://amzn.to/2BzIYFD
Here is the special tool to hold the crank you saw us using
https://amzn.to/2XyBB9X
Here is the comp cams degree wheel that is specific for the crank holding tool https://amzn.to/36YeR6d
Here is the JEGS Degree complete kit that we used
https://amzn.to/3eOUGud
Support BoostedMotorsports by JOINING Today! https://www.youtube.com/channel/UC3B_Q1mNw1iuS8KkAZi_fUA/join
**Checkout other cool products Boosted Motorsports has tested and recommends HERE** 👇
https://www.amazon.com/shop/boostedmotorsports
👇 **SEND STUFF TO THE BOOSTEDMOTORSPORTS P.O. BOX** 👇
PO BOX 1873
San Jacinto, CA 92581
or
315 E Esplanade Ave
#1873
San Jacinto, CA 92583
For transmission parts check out WIT
Contact Clint (937) 262-7452
Mention Boosted Motorsports and save 20%
https://www.wittrans.com/
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#Dodge #Mopar #Trucks
Видео 5.9L Magnum V8 Comp Cams Camshaft INSTALL | PART 2 канала BoostedMotorsports
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
5.9L Magnum V8 Comp Cams Camshaft INSTALL | PART 1Mopar M1 Intake Install | Dodge | How To | DIY | Complete GuideShould You Install a Bored Out Throttle Body | Dodge Magnum V85.9L Dodge Magnum Engine TeardownBudget 318 Dyno Tested - The Buck Stops HereFIRST TEST DRIVE IN HELLCAT SWAP DODGE DAKOTA | EP53DODGE HEMI - Everything You Need To Know | Up To SpeedDon't throw away your old auto parts! Useful application of automotive shock absorbers!Squeezing More Power Out Of Our High-Performance 360 Mopar - Horsepower S13, E20DO CARB SPACERS REALLY WORK? 4-HOLE VS OPEN (360 MAGNUM-HP & AF-FULL DYNO RESULTS)The Complete Shorty Header Install Guide for a Dodge RAM 1500Electric Fan Conversion Install | Dodge DakotaMark's Rebuilt 360. Extream Energy Comp. 9.2 CRHow To Rebuild A V8 Engine | Dodge 5.9 360 Magnum800+ Horsepower 17 Liter Caterpillar Diesel Engine Build from Start to Finish + 1973 PeterbiltGlasspack vs Neighbor Hater vs Flowmaster Flowfx Dodge Ram 5.9 MagnumI Bought the Nicest Dodge Dakota R/T on Earth! (8,000 original mile TIME CAPSULE)Dodge Ram 1500 - Spits, Sputters, Misfires and StallsSetting Sync Magnum Engines