HX One Tonner Build - Fitting a 4 Link Suspension and 9 Inch Diff
The Diff finally arrived so I can get the 4 link fitted and get it back to a roller.
Took about 2 full days to get it fitted. A lot of the time was spent measuring and making sure the geometry was spot on.
Cant stress enough to triple check all measurements before final welding.
Link to McDonalds Bros Racing for the 4 link Kit
https://www.mcdonaldbrosracing.com.au/
Link to Castlemaine Rod shop for the 9 Inch Diff
https://www.rodshop.com.au/
Enjoy!
Видео HX One Tonner Build - Fitting a 4 Link Suspension and 9 Inch Diff канала Shenke Garage
Took about 2 full days to get it fitted. A lot of the time was spent measuring and making sure the geometry was spot on.
Cant stress enough to triple check all measurements before final welding.
Link to McDonalds Bros Racing for the 4 link Kit
https://www.mcdonaldbrosracing.com.au/
Link to Castlemaine Rod shop for the 9 Inch Diff
https://www.rodshop.com.au/
Enjoy!
Видео HX One Tonner Build - Fitting a 4 Link Suspension and 9 Inch Diff канала Shenke Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Relocating Battery - Gusset 4 Link - Final Fitment : HX One Tonner BuildHX One Tonner Build - Fitting Castlemaine Rod Shop Tubular Control Arms and Wilwood Brake kit4-Link Rear Suspension for Air Ride and Coilovers4 Link Bar Angles | 4 Link Drag Racing Suspension Tuning3 Link vs 4 Link vs Radius Arm vs Watts Link vs Wishbone 3 LinkFitting a Reverse Scoop - HX One Tonner BuildFord Bronco 4 Link Suspension Build (2020) - Reckless Wrench GarageTFS: Custom 4 Links Part 1Designed My Very Own 4 Link Suspension!!!355 Stroker - First Start up after 11 years being built - HX One Tonner BuildHow to build a 4 Link suspension, DIY triangulated four link build, Jeep Wrangler TJHX One Tonner Build - Plenum replacement and repairsSuspension Basics Part 3: Watts Link, Triangulated Four Link and Panhard Bar ExplainedInstalling New Brake lines and Ceramic Coated Headers - HX One Tonner Build1963 Ford Falcon Rebuild Episode 6 Welding 4-Link brackets onto my 9" Ford rear endRobs Rod Shop Drag Racing Suspension Episode 1 Basic 4 LinkLED Lights and Restoring the Grill - HX One Tonner BuildNew Rubber and cleaning up the 355 Stroker Engine - HX One Tonner BuildInstalling an eBay 4bar in a 58 Chevy pickup.4 Link Suspension Explained - Rock Rods Tech