Delta VFD-B 2.2kW Parameter Setting | Full Setup Guide (Step-by-Step Tutorial) Motor DATA Sett

The Delta VFD-B Series is a Variable Frequency Drive (VFD) used to control AC motor speed, torque, and direction by adjusting frequency and voltage.
✔️ Key Features
Power: 2.2 kW (3 HP)
Input: 1-phase or 3-phase (model dependent)
Output: 3-phase motor control
Built-in keypad for programming
Protection: overload, overvoltage, overcurrent
⚙️ Basic Parameter Setting (Quick Setup)
These are the essential parameters you must configure before running:
1. Motor Nameplate Settings
(Set according to motor label)
Parameter
Description
Example Value
P1-00
Motor Rated Voltage
220V / 380V
P1-01
Motor Rated Current
(e.g. 5.2A)
P1-02
Motor Rated Frequency
50 Hz
P1-03
Motor Rated Speed
1400 RPM
👉 These ensure proper protection and performance.
2. Control Mode
Parameter
Function
Setting
P0-02
Control Source
0 = Keypad / 1 = External
P0-03
Frequency Source
0 = Keypad / 1 = Analog
👉 For testing:
Set both to 0 (Keypad control)
3. Frequency Settings
Parameter
Description
Example
P0-00
Max Frequency
50 / 60 Hz
P0-01
Min Frequency
0 Hz
P0-04
Base Frequency
50 Hz
4. Acceleration / Deceleration
Parameter
Description
Typical Value
P0-08
Acceleration Time
5–10 sec
P0-09
Deceleration Time
5–10 sec
5. Run Command (Test Run)
Press RUN on keypad
Adjust frequency using ▲ / ▼
🔄 Wiring Overview
Input: R, S, T (power supply)
Output: U, V, W (motor)
Control terminals: for external switches, potentiometer
⚠️ Important Notes
Always match motor voltage & current
Use proper grounding
Never connect power to output terminals (U/V/W)
Set correct frequency (50 Hz in Saudi Arabia)
🧠 Common Applications
Pumps
Fans
Conveyors
Compressors
🛠️ Example Quick Setup (2.2 kW Motor)
P1-00 = 380
P1-01 = 4.8
P1-02 = 50
P0-02 = 0 (Keypad)
P0-03 = 0 (Keypad)
P0-08 = 8 sec
P0-09 = 8 sec

Видео Delta VFD-B 2.2kW Parameter Setting | Full Setup Guide (Step-by-Step Tutorial) Motor DATA Sett канала Technical Ripu