How to remove the valve on Grundfos Pressure Manager (PM2)

See how a Grundfos service specialist remove the valve on Grundfos Pressure Manager (PM2) and find out what the job requires and how it is performed.

The different sections include:
00:00 Introduction

Dismantling:
00:13 Removing the front cover
00:49 Removing the electronic unit
02:22 Removing the pressure sensor
02:53 Removing the end cover and membrane
03:35 Removing the valve

Assembly:
04:22 Fitting the valve
05:16 Fitting the membrane and end cover
06:18 Fitting the pressure sensor
06:51 Fitting the electronic unit and cables
09:39 Fitting the front cover

Learn more about PM 2, spare parts, service kits and additional services and solutions provided by Grundfos on https://product-selection.grundfos.com/products/pressure-manager/pm-2?tab=models and do not hesitate to contact us via http: http://www.grundfos.com/pleasecallus.

DISCLAIMER
This service video provides “how to” guidance for Grundfos products and is aimed only at skilled, trained personnel.

N.B. Any stricter local health and safety regulations and requirements take precedence over this guidance.

The video and any information in it is provided on an “as is” basis and without any liability and/or warranty to the extent permitted by applicable law.

Grundfos reviews and updates the information provided on a regular basis. However, instructions may have changed since publication of this video and therefore please always check the latest Service Instructions and the Installation & Operating Instructions of the related product.

These documents can be found on https://product-selection.grundfos.com/products/pressure-manager/pm-2?tab=documentation.

#pumpservice #pumprepair #grundfospumps #grundfosservice

Видео How to remove the valve on Grundfos Pressure Manager (PM2) канала Grundfos