BLUE ESR CAPACITOR TESTER METER COMPLETE ASSEMBLY - START TO FINISH ALLTRONICS ANATEK BOB PARKER

This is the BLUE ESR CAPACITOR TESTER I have recommended sight unseen. I thought it was time to get one for myself. I opted for the self assembly kit, and a couple of hours later and it is ready. My initial impression, is its really good, much faster readings than the analog ESR meter that I have. Also simple zero of the display is a big plus. It also does very low (non inductive) resistance measurements down to .01 ohm resolution.

If you would like to support my video efforts please consider making a donation at https://www.paypal.me/NORCAL715 Remember with your help we can keep these things out of the landfill, out of the recycle bin, and out of the E-waste facility! Thanks for watching.
Thank you to these people that have supported my channel by making a donation or by having me repair your unit.

Samuel & Nancy Guich
Dot Morgan (2nd time)
Timothy Ritchel (Different unit)
William Holloman Cynthia Adams
Andrew Oros George Savage
Graham Foral Paul Agbuya
Scott Kullen (Thank you for monthly support)
Philip Brown (Thank you for monthy support)
Scott DuVall Christian Brenzel
Russell Houtz Philip Brown
Michael King Erick Pastor
Robert Ettinger Christopher Cicero
Heath Lasswell Timothy Ritchel
Benjamin Rubio Michael Dukes
Dot Morgan Casey Cane
Teri DeLeo Kelly Knutson
Howard Goble Diana Williams
Reed Graham Christopher Wang
David Ammerlaan John Johnson
Shaheed Amirkhan Brett Sherry
Joseph L Ozvold Sweidan Omar
John Eggers Linda Kuo
Daniel Pyles Melanie Branton
Lisa Sklar Barry Marchant
John Harper Larry Mcdonald
Annette Lewis Howard Goble
Hugo Tajimaroa M R Rajesh
Dan Latorre Uri Cohen
Follow me on social media
Facebook
Instagram
Twitter
@NORCAL715

email me NORCAL715videos@gmail.com

00:00 Intro
00:13 Unpacking and inventory
01:23 Instructions and documentation
03:17 A look at the circuit board
04:43 Installing 1% resistors
05:02 Installing 5% resistors
06:53 Installing semiconductors
08:11 Installing capacitors
08:57 Installing pots and tact switch
09:05 Testing for 5 volts before installing IC's
09:31 Installing LED's
09:57 Installing IC's
10:13 Installing test leads
10:49 Calibration and initial tests
12:47 Low battery calibration
13:47 Putting it all in the case
14:19 All assembled, testing some caps
15:11 Final thoughts

Видео BLUE ESR CAPACITOR TESTER METER COMPLETE ASSEMBLY - START TO FINISH ALLTRONICS ANATEK BOB PARKER канала NorCal715