Odds & Ends 90: Straight Edges, Air Compressor and Shop Update
A quick update on things going on in the shop. Lots of interest in the straight edge castings - more to come on possibly getting up a one-time order for these. Also an update on the air compressor pump that had broken pistons. Other shop updates as well.
Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery
Make a one time donation to VintageMachinery via PayPal:
https://www.paypal.me/VintageMachinery
Please Visit: http://www.vintagemachinery.org
Sponsored by:
American Rotary Phase Converters
https://www.americanrotary.com/?sld=krucker
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
Видео Odds & Ends 90: Straight Edges, Air Compressor and Shop Update канала Keith Rucker - VintageMachinery.org
Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery
Make a one time donation to VintageMachinery via PayPal:
https://www.paypal.me/VintageMachinery
Please Visit: http://www.vintagemachinery.org
Sponsored by:
American Rotary Phase Converters
https://www.americanrotary.com/?sld=krucker
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
Видео Odds & Ends 90: Straight Edges, Air Compressor and Shop Update канала Keith Rucker - VintageMachinery.org
Показать
Комментарии отсутствуют
Информация о видео
26 марта 2018 г. 15:49:35
00:18:53
Другие видео канала
Camelback Drill Press Gears 2: Cutting Gear Teeth on the First GearLucas Horizontal Boring Mill Restoration: Making a Morse Taper No. 5 Tailstock AdapterDiresta Bandsaw Restoration 27: Finishing the Bottom Wheel and Installing the TableHorizontal Boring Mill Restoration: Installing the Table Lead Screw and Tailstock BaseCutting Spur Gears on a Kearney & Trecker 3H Horizontal Milling MachineHorizontal Boring Mill Restoration: Fabricating a Drive Dog Plate for the SpindleHorizontal Boring Mill Restoration: Milling an End Spline to Repair the Crank HandleCamelback Drill Press Gears - Part 1: Making the First Gear RingGlover Steam Locomotive Dash-Pots: Re-Valved, Re-Seated, Restored!Metal Planer Restoration 70: Way WipersMonarch 10EE Lathe Gear Segment, Part 4: Grinding to Length and Drilling PinsLucas Horizontal Boring Mill Restoration: Turning and Installing a New Bronze BushingRepairing the Rapid Traverse Clutch Pack on a Kearny & Trecker 2H Horizontal MillWells Index Mill: Repairing the Tilt Gear - Part 2Horizontal Boring Mill: Making a new Lead Screw Nut with Internal Left Hand Acme Threads - Part 1Sugar Cane Mill Restoration: Machining Custom Square Head Nuts on the Metal LatheJimmy Diresta Bandsaw Restoration 21: Machining a New Upper Wheel Shaft with a Tapered SpindleB-17 Bomber Restoration: Broaching a Square Hole for Landing Gear PartCamelback Drill Gears 3: Making a Gear Arbor with Integrated 15 Tooth GearDiresta Bandsaws Restoration 22: Pouring Babbitt Bearings on the Upper Wheel ShaftHealth Update and Piddling in the Shop