Dane Classic 30 / Simon Gotthelf

Hi Friends
Here is the lovely Dane Classic 30 amp.
Remember to check out my video about the Classic 15 too. You can find it right here:

Dane Classic 30 is a vintage-style tube amplifier with that unmistakable warm and dynamic tone that characterizes a good vintage tube amplifier.

If you are the type of guitarist who does not want to compromise on your sound, then the Dane Classic 30 is the perfect amplifier to provide you with all the amplification you will ever need – whether you are in the studio, on stage or at home.

With a Dane Classic 30, you will also be able to achieve a well-sounding and lively amplification of your Blues harmonica or keys.

For many guitarists, the natural overdrive of the Dane Classic 30, combined with the built-in reverb, provides plenty of sound options. But if you like to use your own favorite power pedals along with a good tube amp, then the Dane Classic 30 is the obvious choice for you as well.

Dane Classic 30 is created with a high focus on plenty headroom. Dane 30 is built with “pre amp out” and “power amp in” connectors, so you can get the best possible sound from your pedals in an effect loop.

Dane Classic 30 is built on a popular vintage American amplifier design, which uses the classic combination of 3x 12AX7 preamp tubes and 2x 6L6GC tubes in the power amplifier. It provides 30 watts and is equipped with a 12” Celestion speaker. The control section is equipped with a gain control as well as a 3-band tone control section with bass, midrange and treble controls. You control the overall sound level with the volume control, while Presence allows you to lift the upper midrange, thus making the sound from the amplifier more or less present. A reverb control allows you to adjust the amount of reverb you want in your signal. The fat switch causes the 12AX7 tubes in the preamp to be driven harder, and raises the gain/overdrive level.

Видео Dane Classic 30 / Simon Gotthelf канала Simon Gotthelf Gear Demos