Prepping for bodywork by sandblasting the cab and apply bondo Part 24
More Body work on the 1937 Ford truck, this time we sandblast and pull some dents from the cab with a stud puller. Then apply some fiberglass to the welds before applying bondo to the cab and sanding down the filler to get it ready for primer.
00:00 Game plan
01:17 Pulling cab out to sandblast and treat
06:32 Pulling dents out of the cab and applying fiberglass to welds.
15:45 Sanding and applying bondo to the cab.
29:00 Applying final coats of filler to the cab
40:22 Explaining how to work filler if your hand sanding it.
Music
My Train's A Comin' - Unicorn Heads
Dusty Fingers - DJ Williams
A Trip Around the Moon - Unicorn Heads
Trips - Topher Mohr and Alex Elena
An Army of None - The Whole Other
Sunshine on Sand - Unicorn Heads
Fractal of Light - Chris Haugen
Видео Prepping for bodywork by sandblasting the cab and apply bondo Part 24 канала Halfass Kustoms
00:00 Game plan
01:17 Pulling cab out to sandblast and treat
06:32 Pulling dents out of the cab and applying fiberglass to welds.
15:45 Sanding and applying bondo to the cab.
29:00 Applying final coats of filler to the cab
40:22 Explaining how to work filler if your hand sanding it.
Music
My Train's A Comin' - Unicorn Heads
Dusty Fingers - DJ Williams
A Trip Around the Moon - Unicorn Heads
Trips - Topher Mohr and Alex Elena
An Army of None - The Whole Other
Sunshine on Sand - Unicorn Heads
Fractal of Light - Chris Haugen
Видео Prepping for bodywork by sandblasting the cab and apply bondo Part 24 канала Halfass Kustoms
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Welding and fitting the hood and fender swapping our 49 GMC roadster.Starting to work on our 1949 GMC Roadster pickup againAbandoned 1956 Oldsmobile 88 can we get it running and driving again?Building 3 inch Exhaust for our Turbo LS 1954 Chevy!New Project! Pulling parts to LS swap a '74 Chevy pickupInstalling our turbo and modifying our radiator to fit our needs.Touring a Vintage wrecking yard in Manitoba Canada VaVaVoomGaragePainting our patch panels, and using barn board for the bed floor in our 59 Chevy Apache.Fitting window patch panels on our 1959 Chevy ApacheRepairing rusty fender and cab corners with homemade patch on our 1959 ApacheRobbing parts to rebuild the brakes on the 59 Chevy ApacheGetting our 59 Chevy Apache running and some small shop updates!Finishing work on the 1953 Chevy pickup part 2 of 2Working on a 1953 Chevy pickup part 1 of 2.Austin pulling the engine out of his Buick and tire swapping the Napco.Motor Swapping the 1959 Chevy Apache and fixing our English wheel.Pulling in my 1954 Chevy to see what parts we need to continue our build on it.Pulling in Austins 1955 BuickSimple DIY CNC plasma table with plasma cutter for 600$ off Amazon.Cleaning up some tools and sheds and doing some maintenance on our summer vehicles.Gathering some equipment from the old shop and starting to rebuild what we can.