SIBOOR Voron 0.1 Young Version Unboxing video

SIBOOR website https://reurl.cc/91NMlX
to make purchase of SIBOOR V0.1 Young Version

SIBOOR Discord group https://discord.gg/hpF4bBbrht

Why choose the SIBOOR V0.1 Young version?

1. Good price & complete kit, you will receive everything you need to build a complete printer.

2. SIBOOR V0.1 Young version： FLY Gemini 3.0 motherboard is included, no need for a Raspberry Pi nor a separate driver board. With Klipper pre-installed.
The motherboard supports a maximum voltage of 48V input, but it is limited to the 2209 drive used in the kit, and the maximum drive voltage is 24V. If you need to use a 48V high-voltage input, it is recommended to replace the withstand voltage drive, such as 5160.

3. Customized V6 hot-end, maximum temperature reach 300℃, bimetallic throat three-hole nozzle. Can print ABS, PLA, TPU, PETG, etc.

4. A full set of ABS-printed parts included （Option 1: green and grey; Option 2: red and black; Option 3: customized colour）

Note:

For all SIBOOR V0.1 kits delivered since 11th, Nov 2022, the motherboards with Klipper + Fluidd pre-installed have all been installed with fuses, jumper caps, and drivers. The system, motor, temperature measurement, and end stop are all powered on and tested for normal operation. Even novices who do not understand software and hardware can easily use it, greatly reducing the difficulty of use.

Instagram
https://www.instagram.com/voron_siboor/
Facebook
https://www.facebook.com/profile.php?id=100083922403396
Twitter
https://twitter.com/Siboor3dprinter
Discord group
https://discord.gg/hpF4bBbrht
Website
http://www.siboor.com/

#3dprinter #3dprinting #impresion3d #impresora3d #voron #voronprinter #3dfilament #3dprint #vorondesign #siboor

Видео SIBOOR Voron 0.1 Young Version Unboxing video канала SIBOOR 3D Printer Kit