How to power Raspberry Pi and Arduino from LiPo batteries

In most robot projects you'll have a battery to power the motors and actuators. You also need a controller, where Raspberry Pi and Arduino are convenient and powerful options. In this video I show how you can power that controller from the LiPo battery. In the first part I cover various parts you can use to generate 5 volts. Next I cover some parts and techniques to deliver 5V into the board.

0:00 Introduction
0:38 Please use a fuse
1:31 PCB mounted step-down converters
2:38 Standalone converter modules
3:21 Using the BEC on an ESC
4:25 Where 5V can go into the Pi
5:09 Warning against high resistance
6:55 High resistance problem explanation
8:20 Feeding slightly more than 5V
8:57 Using a USB cable
10:23 Using a HAT
11:08 HAT as used in robot
11:46 Using separate PCB and ribbon cable
13:17 Monitoring battery voltage
16:03 Arduino
18:16 Outtro

Instagram: https://www.instagram.com/creo_nova/​
Website: https://www.creonova.nl/​

Видео How to power Raspberry Pi and Arduino from LiPo batteries канала Antalz