Resized & Trimmed Rife Brass won't Chamber? This tip might fix it!

If you would like to donate to the B.R.O. channel click on links below! Thanks folks! Wade
http://www.paypal.me/WadeRush
https://www.patreon.com/BubbaRountree
In the past, I've run into problems with my resized and trimmed rifle brass fitting too tight in the chamber. When this happens, you need to make sure that your full length sizing die is adjusted properly. My RCBS manual says; Pull your press handle all the way down, adjust your full length resizing die down until it contacts the shell holder, then srew down 1/4 turn. Sometimes that isn't enough. You may have to turn your die 1/2 turn after contact with shell holder in order to get the brass resized sufficent enough for it to chamber without any difficulty. Hope this helps guys!

Видео Resized & Trimmed Rife Brass won't Chamber? This tip might fix it! канала Bubba Rountree Outdoors