Flyin Miata V-maxx Xxtreme Coilovers Install Suspension Upgrade DIY
How to install the Flyin' Miata V-maxx Xxtreme coilovers in my 1996 Mazda MX-5 Miata! The Flyin Miata coilovers required some assembly, but they have a great instruction packet that comes with the kit. If you are installing them please refer to their instructions for assembly.
It was finally time to get that hella flush fitment for the Miata. I had waited two months to build my own DIY Budget Bilstein set up, but apparently Bilstein just doesn't want to send the B8 shocks to Summit racing right now (stuck on backorder 4everrrrr). So we went the tried and true route with Flying Miata!
________________________________________________________
Shameless Plug: Using our affiliate links means we can continue making terrible videos. Thank you in advance for supporting our cause!
Torque Wrench: https://amzn.to/2AtaaT3
Socket Adapters: https://amzn.to/2AuJ5P9
________________________________________________________
Tools:
-Socket Set (10mm, 12mm, 14mm, 18mm, 21mm)
-Torque Wrench
-Flat head?
-Jack
-Jack Stands
Torque Specs:
-Upper Shock Mount (AKA Tophats) 22-27 lb-ft
-Lower Shock bolts 54-69 lb-ft
-Front Upper Inner Control Arm (Long Bolt) 87-101 lb-ft
-Upper Shock Nuts (nut holding bushings to top hat) tighten until the bushing is roughly the same diameter of the top washer, this should be done after the weight of the car is resting on the shocks
-End Links 27-40 ft-lb (after the weight of the car is resting on suspension)
-Rear control arm bolt (I tightened this the same as the lower shock bolt because it was similar length and bolt size) 54-69 ft-lb
As always thank you so much for watching and be sure to subscribe for more videos!!
Video Gear (Affiliate Links):
DSLR: http://amzn.to/2sYTNYK
Wide Angle Lens: http://amzn.to/2tiSdR4
50mm Lens: http://amzn.to/2skUAWd
Camera Bag: http://amzn.to/2rXxKTT
External Recorder: http://amzn.to/2sxWPpJ
Lavalier Microphone: http://amzn.to/2sZ3UwY
Sony Action Cam: http://amzn.to/2wNit7i
Action Cam Suction Mount: http://amzn.to/2sl5ICp
Shin Etsu Grease:
https://amzn.to/2qNN2Jb
Thanks again and check out all of our social media locations:
Social Media:
http://www.hardwaylearning.com (blog)
http://www.instagram.com/hardwaylearning/
http://twitter.com/hardwaylearning
http://www.pinterest.com/hardwaylearning/
#miatagang #miata #flyinmiata #miataracecar #racecar #coilovers #cambergang
Music by Joakim Karud http://youtube.com/joakimkarud
Видео Flyin Miata V-maxx Xxtreme Coilovers Install Suspension Upgrade DIY канала Hardway Learning
It was finally time to get that hella flush fitment for the Miata. I had waited two months to build my own DIY Budget Bilstein set up, but apparently Bilstein just doesn't want to send the B8 shocks to Summit racing right now (stuck on backorder 4everrrrr). So we went the tried and true route with Flying Miata!
________________________________________________________
Shameless Plug: Using our affiliate links means we can continue making terrible videos. Thank you in advance for supporting our cause!
Torque Wrench: https://amzn.to/2AtaaT3
Socket Adapters: https://amzn.to/2AuJ5P9
________________________________________________________
Tools:
-Socket Set (10mm, 12mm, 14mm, 18mm, 21mm)
-Torque Wrench
-Flat head?
-Jack
-Jack Stands
Torque Specs:
-Upper Shock Mount (AKA Tophats) 22-27 lb-ft
-Lower Shock bolts 54-69 lb-ft
-Front Upper Inner Control Arm (Long Bolt) 87-101 lb-ft
-Upper Shock Nuts (nut holding bushings to top hat) tighten until the bushing is roughly the same diameter of the top washer, this should be done after the weight of the car is resting on the shocks
-End Links 27-40 ft-lb (after the weight of the car is resting on suspension)
-Rear control arm bolt (I tightened this the same as the lower shock bolt because it was similar length and bolt size) 54-69 ft-lb
As always thank you so much for watching and be sure to subscribe for more videos!!
Video Gear (Affiliate Links):
DSLR: http://amzn.to/2sYTNYK
Wide Angle Lens: http://amzn.to/2tiSdR4
50mm Lens: http://amzn.to/2skUAWd
Camera Bag: http://amzn.to/2rXxKTT
External Recorder: http://amzn.to/2sxWPpJ
Lavalier Microphone: http://amzn.to/2sZ3UwY
Sony Action Cam: http://amzn.to/2wNit7i
Action Cam Suction Mount: http://amzn.to/2sl5ICp
Shin Etsu Grease:
https://amzn.to/2qNN2Jb
Thanks again and check out all of our social media locations:
Social Media:
http://www.hardwaylearning.com (blog)
http://www.instagram.com/hardwaylearning/
http://twitter.com/hardwaylearning
http://www.pinterest.com/hardwaylearning/
#miatagang #miata #flyinmiata #miataracecar #racecar #coilovers #cambergang
Music by Joakim Karud http://youtube.com/joakimkarud
Видео Flyin Miata V-maxx Xxtreme Coilovers Install Suspension Upgrade DIY канала Hardway Learning
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Flyin' Miata Vmaxx Classic Assembly](https://i.ytimg.com/vi/g-9XKgt5vh0/default.jpg)
![Poly or Rubber Bushings? (FM Live)](https://i.ytimg.com/vi/bWqiYm9aNu8/default.jpg)
![FM Suspension Part1 - Overview](https://i.ytimg.com/vi/uYiIXjCkd2U/default.jpg)
![Neues Fahrwerk für den MX5 | Einmal alles neu bitte | Flyoff Garage](https://i.ytimg.com/vi/bVnXp7uds3E/default.jpg)
![Porsche 944 Recovery Mode Plugs, Wires, Props](https://i.ytimg.com/vi/AUNrA70_y70/default.jpg)
![$900 Miata Build. Junk Yard Rescue](https://i.ytimg.com/vi/5gs9GG1sr84/default.jpg)
![EVERYTHING You Need To Know About Adjustable Cam Gears On Your Miata! [Project 2SJ Ep11]](https://i.ytimg.com/vi/a0maK7bPFUk/default.jpg)
![How to Install Coilovers | NA Miata](https://i.ytimg.com/vi/6QyNs-glOEk/default.jpg)
![$500 Header and Exhaust For the BUDGET MIATA (GOOD Deal or BAD?)](https://i.ytimg.com/vi/Pe0FKtmIdAo/default.jpg)
![230HP Turbo Miata Project Car Build](https://i.ytimg.com/vi/gS6Y1CKyr48/default.jpg)
![Bilstein B14 Coilover Installation on BMW F30](https://i.ytimg.com/vi/r2C4bgnAzWc/default.jpg)
![How to Adjust Coilover Ride Height (FM Live)](https://i.ytimg.com/vi/iGS5gDOs9Gg/default.jpg)
![NB Miata Coilover Install - From OEM to Track Ready - Complete Coilover Replacement. QUICK VIDEO!](https://i.ytimg.com/vi/eT1bFHZ0tPg/default.jpg)
![Miata coilovers install | FM Vmaxx XXtreme Sport](https://i.ytimg.com/vi/5xGu-gkV_rw/default.jpg)
![NB MIATA INTAKE INSTALL (SOUND CLIPS)](https://i.ytimg.com/vi/eNwLtQiiNQs/default.jpg)
![Miata Nardi install with horn & no airbag light](https://i.ytimg.com/vi/5cW7lSy0qig/default.jpg)
![Lowering My MX5 - Coilover Install | Mazda MX5 Miata](https://i.ytimg.com/vi/J-SjjGY2mac/default.jpg)
![Fixing Miata trunk gas smell and surface rust](https://i.ytimg.com/vi/8B7GBqEnUtA/default.jpg)
![Installing Coilovers on My 370Z (COMPLETE GUIDE)](https://i.ytimg.com/vi/GC4Y3Wy223U/default.jpg)
![Cheap coilovers - a good option? (FM Live)](https://i.ytimg.com/vi/fBnE6dS5r2E/default.jpg)