How to Replace an Upper Ball Joint

Upper Ball Joint Replacement. This video will show you how to replace the Upper Control Arm Ball Joint on a Chevy Trailblazer, GMC Envoy, etc. Replacing a ball joint is fast and easy and can be done with basic hand tools and a ball joint press you can rent for free at your local parts store. This ball joint is pressed but some are bolt on which is even easier.

Tools Used:
35mm Axle Nut Socket: https://amzlink.to/az0SZ7khu8XLD
Ball Joint Press: https://amzlink.to/az03zomVrj8E8
Torque Wrench I use: https://amzlink.to/az02aFYApcVzo
Socket Set I use: https://amzlink.to/az00dtiFNCjxO

How to Press a Ball Joint: https://www.youtube.com/watch?v=37NgLM4tIzw
How to Tell if a Ball Joint is Bad: https://www.youtube.com/watch?v=62bVn7E8gyk
How to Replace Upper Control Arm (Trailblazer): https://www.youtube.com/watch?v=wZGr8Xf2ip8
How to Replace a Ford Upper Control Arm: https://www.youtube.com/watch?v=v7bOxQe_WhU
The Part Website: http://www.mevotech.com/product/supreme-chassis-ball-joints

0:00 Intro
0:52 Tools needed
1:26 Remove axle nut
3:31 Loosen brake line/wires
4:47 Move upper control arm
5:24 Move knuckle
6:01 Remove old ball joint
10:52 Press in new ball joint
12:45 Putting everything back
15:31 Outro

**If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday**

-As an Amazon Associate I earn from qualifying purchases.
-Website: https://www.ChrisFixed.com
-Facebook: https://www.facebook.com/chrisfix8
-Twitter: https://twitter.com/ChrisFixed
-Instagram: https://instagram.com/chrisfixit
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix

Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Видео How to Replace an Upper Ball Joint канала ChrisFix