CA (super glue) Finish

After milling up a piece of Lilac, I promised you that I would show you how I go about putting a CA Finish on it for a pen, so here ya go. I am NOT saying that this is the only way or even the best way to do this, it's just my way of doing it. Hopefully you'll find some of this information helpful if you currently struggle with getting a good CA Finish on a project.
More videos on Finishing: https://www.youtube.com/playlist?list=PLVQ607vevyCSa24g2r6VGo9TVtMmsb9jB

Products Used:
These are not affiliate links. These are just links to the materials I used in the video. They are listed here so that you can take a look, shop around for yourself and decide which products would work best for you.

5 Roll Sanding Pack: https://www.amazon.com/Woodturner-ins-Multi-Roll-Sanding-Pack/dp/B004NID36I/ref=sr_1_3?ie=UTF8&qid=1515137449&sr=8-3&keywords=5+roll+sanding+pack

Stick Fast Non-stick pen bushings: https://www.woodturnerscatalog.com/p/19/6020/Stick-Fast-Non-Stick-Pen-Bushings-4-Pack

Starbond super fast thin CA glue: https://www.amazon.com/gp/product/B00C32ME6G/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

MicroMesh sanding pads: https://www.woodturnerscatalog.com/p/36/2459/Micro-Surface-Pen-Finishing-9-Piece-Set

Hut Ultra Gloss Plastic Polish: https://www.woodturnerscatalog.com/p/40/1999/Hut-Ultra-Gloss-Pen-Polish

==================================================

If you like this content, please feel free to share it with others. Thanks for watching and have a great day!

=================================================
DISCLAIMER
READ THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please stay safe, work smart and only attempt to do the things that YOU feel safe doing.
Thank You.
==================================================

If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).

Facebook : https://www.facebook.com/MakeTheFirstCut
You can also find me on:
Google+ : https://plus.google.com/u/0/109459687839566728278/posts/p/pub
Email: MakeTheFirstCut@gmail.com
___________________________________________________

Video Music & sfx: (All music and sfx are taken from the YouTube audio library)

“Run” by Ethan Meixsell

“Hitting The Streets” by JR Tundra

Видео CA (super glue) Finish канала Chris Cute