Husqvarna | Brushcutter 545RXT With a Trimmer Head.

What is the proper technique for using a Trimmer/Brushcutter? If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the guard will automatically ensure any excess length is removed. When cutting, using a sweeping motion, will keep consistency. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling. This working principle avoids overheating of the engine, especially when working in hot weather and under heavy load. If the grass is young, then you don't need to work at full capacity to cut it. The operator should feel the work of the machine. If the line does not cope with the grass, then the speed should be increased, but with all this, it is necessary to mow in the throttle release mode. Which Trimmer line to choose? When choosing a trimmer line, you should primarily consider the power of the Trimmer that requires the particular line. People often think that the thicker the line, the longer it will last and not break, but the air resistance of the Trimmer line when it rotates is not taken into account. Working with too thick a line will deplete the engine resource faster. Trimmers mow at 8000 - 10000 rpm, even as the cord diameter increases by 0.5 mm, the air resistance increases so significantly that underpowered Trimmers can even overheat and will require expensive repairs. ▶️https://www.husqvarna.com/uk/parts-accessories/trimmer-lines/

Видео Husqvarna | Brushcutter 545RXT With a Trimmer Head. канала AutoTuneTM