Shed ⇒ Workshop. Part 1 - Cleaning
Part 2 - https://youtu.be/IqYR9ksPEnY
Some time ago, we planned to build or buy a building for a workshop, but because things in the world have become complicated and the future is uncertain, we decided to work here, where we are now.
We decided to make a workshop from the old barn, which is connected to the current workshop.
The pros of this are:
- more square meters
- a wider, longer and higher room
- the ability to properly plan the arrangement of machines, shelves, etc.
- making the correct electrical, pneumatic and lighting installations
- relatively even and solid floor
- no cracked, several-ton roof overhead.
- possibility of driving a pallet truck
There are more advantages to this solution, but it's hard to replace them :)
Perhaps in the future we will tear down the wall dividing the two rooms and make one large workshop. Time will tell.
In the video you will not see the trailer I made recently, because these are recordings from a few weeks ago and the trailer was made during renovation.
This video is an introduction. Currently, the work is more advanced, but you will find out about it in the next videos :)
https://youtu.be/kWsUem33_ro - Mobile Gas-Powered Belt Conveyor
Видео Shed ⇒ Workshop. Part 1 - Cleaning канала Made in Poland
Some time ago, we planned to build or buy a building for a workshop, but because things in the world have become complicated and the future is uncertain, we decided to work here, where we are now.
We decided to make a workshop from the old barn, which is connected to the current workshop.
The pros of this are:
- more square meters
- a wider, longer and higher room
- the ability to properly plan the arrangement of machines, shelves, etc.
- making the correct electrical, pneumatic and lighting installations
- relatively even and solid floor
- no cracked, several-ton roof overhead.
- possibility of driving a pallet truck
There are more advantages to this solution, but it's hard to replace them :)
Perhaps in the future we will tear down the wall dividing the two rooms and make one large workshop. Time will tell.
In the video you will not see the trailer I made recently, because these are recordings from a few weeks ago and the trailer was made during renovation.
This video is an introduction. Currently, the work is more advanced, but you will find out about it in the next videos :)
https://youtu.be/kWsUem33_ro - Mobile Gas-Powered Belt Conveyor
Видео Shed ⇒ Workshop. Part 1 - Cleaning канала Made in Poland
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Shed ⇒ Workshop. Part 2 - DemolitionShed ⇒ Workshop. Part 4 - Bricklaying and floors.Chain Saw HACK 6 - Earth AugerDIY Tool | Make A Hydraulic Vise | Step by Step in WorkshopHomemade mini dumperHomemade "KINETIC" Log Splitter - BUILDConcrete fence post Removal ToolCutting steel like butter! - Machine build DIYRenovation WORKSHOP 2020 / PART 2 (New Table, Shelves, Closets...)Restoring an Ancient Barn Roof | Part 1Making electric Roller Bender Part 1/3Shed ⇒ Workshop. Part 6 - Plaster and bricklayingBlacksmithing - Power hammer maintenanceWorkshop tour 2 years on with extension store roomMaking Wood chipper mechanism [PLANS]Making Mobile Battery Powered Scissor Lift Table (workbench)Wood chipper & Log splitter - BUILDDump trailer BUILDUK Restoration Workshop Build ep 1Making simple Power File DIY