How to easily remove a stuck wheel hub assembly **Works for ANY vehicle with a sealed unit bearing**

If you enjoyed this video, please consider supporting the channel by subscribing, ringing the bell, and checking out my other videos to ensure more videos like this will be made in the future!

Are you at wits end trying to remove a wheel hub assembly that's seemingly welded itself to the knuckle? Check this trick out!

You will need to harvest a brake rotor either from your vehicle (DO NOT use your currently installed rotor, you WILL damage it) or one with the same bolt pattern. In this instance, I used a REAR rotor, as it does not have cooling vanes and is a bit thinner. Also you'll need a sledgehammer and a pipe wrench (the longer the length of both the better)

Install the rotor backwards onto the hub and place the pipe wrench tightly at the 12 o'clock position. Take a whack or 3 (or however many it takes) at the end of the pipe wrench and she should pop free!!

As I mentioned, in order to facilitate easy removal in the future, it's a good idea to clean up the mounting surface of the knuckle using a wire wheel on the end of a drill, or some sandpaper, or whatever you have handy. Clean the surface with some brake cleaner, then coat it with some grease (I don't recommend Anti-Sieze, as it will dry out and you'll find yourself in the same predicament.)

This is what I used in the video:
https://www.amazon.com/AGS-SG8-Lubricant/dp/B000KXLR5E/ref=sr_1_1?dchild=1&keywords=sil-glide&qid=1589051773&sr=8-1
Thanks for watching! Any questions or comments, please post below. If you found this informative or helpful in any way, give a the video a thumbs up! Be sure to check out my other videos and hit the subscribe button!

#StubbornWheelBearing #Bearing #Hub #UnitBearing #BearingWontComeLoose #Impala #StuckBearing

Видео How to easily remove a stuck wheel hub assembly **Works for ANY vehicle with a sealed unit bearing** канала Certified Shadetree