Wire wrap pendant tutorial 'Hyacinth' FULL VERSION.

Hello and welcome to my latest tutorial.

To make this pendant you will need -
• 0.8mm wire (20g), 2 x 9" (23cm)
• 0.315mm weaving wire (28g) 100cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• Drilled cabochon or large bead, mine is 25mm by 30mm wire (you can use any size or shape, just remember to adjust wire length and weave repeats accordingly)

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

How I oxidize my bare copper - https://youtu.be/_cE_rtXKPWA
Facebook - https://www.facebook.com/kellyjoneswirejewellery
IG jones_kel
My Etsy store - (where you can see my tutorials and jewellery for sale)
https://www.kellyjonesjewellery.com

Thanks for watching x

Видео Wire wrap pendant tutorial 'Hyacinth' FULL VERSION. канала Kelly Jones Jewellery