How To: Set your Throttle Endpoint on Nitro RC Car [Beginner Tutorial with Ryan Lutz of LutzRC]
Showing you how to set your throttle endpoint so you’re not overextending the throttle servo or carburetor. Also to be sure you are maximizing fuel mileage and tuning window.
In the video is an Agama A319 1/8th Nitro Buggy with
Futaba 7PX Limited Edition radio and
Futaba HPS CB 700 servos.
The Engine is a Bullitt B-223 .21 size.
Measurements- On OS Based engine between 58-59mm when opened. Which is basically opening between 4.5-5.5mm from a closed carb on any engine. Please note if you need more power don't be worried about opening to the venturi size, but no further.
Social Media:
Find my blog here: https://www.lutzrc.com/blog
Facebook: https://www.facebook.com/lutzrc/
Instagram: @lutzrc
TikTok: @lutzrc
Видео How To: Set your Throttle Endpoint on Nitro RC Car [Beginner Tutorial with Ryan Lutz of LutzRC] канала Ryan Lutz
In the video is an Agama A319 1/8th Nitro Buggy with
Futaba 7PX Limited Edition radio and
Futaba HPS CB 700 servos.
The Engine is a Bullitt B-223 .21 size.
Measurements- On OS Based engine between 58-59mm when opened. Which is basically opening between 4.5-5.5mm from a closed carb on any engine. Please note if you need more power don't be worried about opening to the venturi size, but no further.
Social Media:
Find my blog here: https://www.lutzrc.com/blog
Facebook: https://www.facebook.com/lutzrc/
Instagram: @lutzrc
TikTok: @lutzrc
Видео How To: Set your Throttle Endpoint on Nitro RC Car [Beginner Tutorial with Ryan Lutz of LutzRC] канала Ryan Lutz
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Set Your Throttle Linkage, End Points (EPA) & Install a Fail SafeSMART Engine Break-in Machine demonstration with Ryan LutzSee Through Engine on TURBO NITRO & EFI (E.7)Nitrorcx Guide: Fine Tuning your Nitro RC CarHobao Hyper Vs Nitro Throttle servo set up,How To: Setting Steering Endpoints on your R/C Car [Beginner Tutorial with Ryan Lutz of LutzRC]Nitro Setup and Tuning | Traxxas SupportHow to Adjust your Brake Bias, and Linkage on your Nitro R/C car [Beginner Tutorial with Ryan Lutz]Tuning the low and high speed needle of your nitro engine . Kyosho mp9 tki4. Good and bad signsAdam Drake from Mugen Seiki Racing show how to set-up throttle and brake linkage.How To Set your Servo Endpoints & Why it Matters - For Arrma & Traxxas TQiHow to R/C car tear down into clips for maintenance [Beginner Tutorial with Ryan Lutz of LutzRC]HPI Small Block Getting Started GuideHow to Tune a Nitro Engine – The basics.Different nitro engine Venturi’s and setting your idle gapSetting brake linkage. How much brake is needed?Setting up your rc car's throttle, brake and steering end pointsIdiot Tries to Fly Giant NITRO RC HelicopterYuk belajar RC engine susah hidup dan gimana mengatasi banjir