1968 GTO - Pontiac 461 Stroker w/Butler Performance CNC-ported Edelbrock Aluminum Heads

Installation, start-up, and break-in of the Pontiac 461 stroker in Jordan's 1968 Pontiac GTO. This build is based on the original, numbers-matching, 400 block. It's now equipped with an Eagle stroker kit from Butler Performance Pontiac, with forged 6.8" rods and forged Mahle pistons. It's topped with a set of Edelbrock d-port aluminum heads, that Butler Performance milled down to 68cc chambers, added 2.11IN/1.77EX stainless Ferrea valves, and then CNC ported to flow 310 cfm. Special thanks to our friend, Tim Schwendt, for machining and assembling the bottom end and, of course, Butler Performance for all of their help along the way. We'll have much more on this build in the days ahead, thank you all for watching and supporting this project!

Видео 1968 GTO - Pontiac 461 Stroker w/Butler Performance CNC-ported Edelbrock Aluminum Heads канала RamblinAround