PCB Delayering: CNC Milling 1
Raw video from our PCB Deconstruction Techniques research: http://www.grandideastudio.com/portfolio/pcbdt/
Delayering an iPhone 4 16GB Logic Board with a T-Tech QuickCircuit 5000 CNC Milling Machine and 1/8” diameter carbide endmill specifically designed for working with non-ferrous materials (Think & Tinker MN208-1250-019F). This state-of-the-art PCB features 10-layers with a total thickness of 0.75mm (29.5mil), laser-drilled microvias, and via-in-pad construction. Control and manipulation of milling, drilling, and routing procedures is achieved using T-Tech’s IsoPro software running on a host computer, except for tool type, tool cutting depth (Z-axis), and solenoid force, which are manually set.
Once we could begin to see the next layer of copper beneath the substrate, we stopped milling and used a fiberglass scratch brush to remove the remaining substrate and expose the copper area.
Видео PCB Delayering: CNC Milling 1 канала Joe Grand
Delayering an iPhone 4 16GB Logic Board with a T-Tech QuickCircuit 5000 CNC Milling Machine and 1/8” diameter carbide endmill specifically designed for working with non-ferrous materials (Think & Tinker MN208-1250-019F). This state-of-the-art PCB features 10-layers with a total thickness of 0.75mm (29.5mil), laser-drilled microvias, and via-in-pad construction. Control and manipulation of milling, drilling, and routing procedures is achieved using T-Tech’s IsoPro software running on a host computer, except for tool type, tool cutting depth (Z-axis), and solenoid force, which are manually set.
Once we could begin to see the next layer of copper beneath the substrate, we stopped milling and used a fiberglass scratch brush to remove the remaining substrate and expose the copper area.
Видео PCB Delayering: CNC Milling 1 канала Joe Grand
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Prototype This: Scrolling sign inside the Goodyear Blimp](https://i.ytimg.com/vi/t4gfF63IL-U/default.jpg)
![DC17 Badge Hack: Shake to Reset](https://i.ytimg.com/vi/2Ozeearn_PU/default.jpg)
![Biggie (Abolition Demo 2003)](https://i.ytimg.com/vi/YLBjiHKkkGo/default.jpg)
![LRF: Demonstration of the Parallax LRF Image Viewer](https://i.ytimg.com/vi/iHvMl2scUdA/default.jpg)
![7 Seconds: Young 'Til I Die @ This is Hardcore Fest, August 10, 2013.](https://i.ytimg.com/vi/b0MG0gHIkig/default.jpg)
![Judge: Fed Up @ This is Hardcore Fest, August 10, 2013.](https://i.ytimg.com/vi/OXYTwUKgIkM/default.jpg)
![PCB Delayering: CNC Milling 2](https://i.ytimg.com/vi/D2dusObwQSU/default.jpg)
![PCB Solder Mask Removal: Fiberglass Scratch Brush 2](https://i.ytimg.com/vi/VECNdfSAgsE/default.jpg)
![DC16 Badge Hack: Cellular Automaton](https://i.ytimg.com/vi/qKZ7rMu85Tc/default.jpg)
![7 Seconds: We're Gonna Fight @ This is Hardcore Fest, August 10, 2013.](https://i.ytimg.com/vi/dxv1nv4BmAM/default.jpg)
![DC17 Badge Hack: External OLED Display](https://i.ytimg.com/vi/yY1r0x8Drfk/default.jpg)
![DC17 Badge Hack: Sound-Fearing Blimp](https://i.ytimg.com/vi/JNID79AzlCc/default.jpg)
![DC18 Badge Hack: RFID & Barcode Emulator](https://i.ytimg.com/vi/gmrk3jpqZOg/default.jpg)
![LRF: Laser Range Finder Module Calibration](https://i.ytimg.com/vi/1gk_tRbJO84/default.jpg)
![Prototype This: Car Airbag on a Dummy #1, High-Speed Camera](https://i.ytimg.com/vi/EhPEEWu-bp0/default.jpg)
![PCB Imaging: 3D/CT X-Ray Manual Slicing (Cross Section)](https://i.ytimg.com/vi/pK0Ku_YHegw/default.jpg)
![Supervision (Abolition Demo 2003)](https://i.ytimg.com/vi/O6daqb91Wj4/default.jpg)
![Dutch Hacker Video via 2600 Magazine (1991, Part 3 of 3)](https://i.ytimg.com/vi/gHQ5DZFJ1Dg/default.jpg)
![DC16 Badge Hack: LED animations & music generator](https://i.ytimg.com/vi/cYkq1mznEko/default.jpg)
![PCB Solder Mask Removal: Abrasive Sand Blasting 1](https://i.ytimg.com/vi/kXaSjnhObPA/default.jpg)