1998 BMW E36 3-series Clutch Dual Mass to Single Mass Flywheel

Parts Installed: http://amzn.to/2DbBX92

In this video, we'll show you how to convert a DMF (dual mass flywheel) to an SMF (single mass flywheel) on a BMW 3-Series. We also replace the clutch and rear main seal. This requires removal of the exhaust and obviously the driveshaft.

00:00 - Intro
01:19 - Remove Exhaust
04:57 - Remove Driveshaft
08:43 - Disconnect Shifter & Slave Cylinder
10:35 - Remove Transmission
14:24 - Remove Pressure Plate & Flywheel
16:47 - Replace Rear Main Seal with New
19:37 - Replace Pilot Bearing with New
20:26 - Install New Pressure Plate & Flywheel
31:47 - Install New Throwout Bearing
37:07 - Install Transmission
42:34 - Reconnect Shifter & Slave Cylinder
46:27 - Install Driveshaft
52:02 - Install Exhaust

Видео 1998 BMW E36 3-series Clutch Dual Mass to Single Mass Flywheel канала APDTY