vibration reduction plate(Enable subtitles)

This special plate is designed to support and stabilise the RH crank shaft which is cantilevered after the bearing and is under load of cams and rotor, causes a moment which gives rotor a wobbling movement, hence forming vibrations on high revs.

Benefits of the product
1.Stabilises the uneven distribution of mass around the axis.
2.No flex on the shaft, hence no backlash between the pinion and cam wheel on any angle of rotation.
3..Minimising the vibrations of motorcycle between speed of 60- 90 kmph.
4.Increased life of bearings.
5.Reduced cam wheel wear and noise.

PLEASE NOTE: We do not claim that this product will repair broken components on your motorcycle, if your motorcycle is vibrating “EXCESSIVELY” you may need to have your mechanic check it, there could be several conditions such as bent, twisted or out of balance crankshaft, loose engine bolts, broken engine mounts or head steady, badly worn engine, out of balance clutch etc.

What our product DOES DO is to reduce the vibration that is there inherently with all UCE engines, our product reduces crankshaft flex by giving extra support in the form of an another bearing.

EVEN IF YOU THINK YOUR BIKE DOESN`T VIBRATE TO MUCH; DO YOUR BIKE A FAVOUR AND GIVE IT A LITTLE MORE SUPPORT ANYWAY!

Видео vibration reduction plate(Enable subtitles) канала Carberry Motorcycles